Sökning: "polycrystalline"

Visar resultat 1 - 5 av 42 uppsatser innehållade ordet polycrystalline.

  1. 1. Development of a microfluidic device to study simultaneous crystallization in the LIBs recycling process

    Master-uppsats, KTH/Kemiteknik

    Författare :Shefali Paresh Solanki; [2023]
    Nyckelord :Battery recycling; microfluidics; simultaneous crystallization; simulation; crystal technology; microfluidics experimental setup; Batteriåtervinning; mikrofluidik; simultan kristallisering; simulering; kristallteknologi; mikrofluidikexperimentuppställning;

    Sammanfattning : Återvinning av litiumjonbatterier (LIB) är avgörande på grund av kritiska råmaterialreserver och miljöhänsyn vid kassering. Hydrometallurgisk LIB-återvinning, en framstående industriell teknik, står inför kostnadseffektivitets- och komplexitetsutmaningar. LÄS MER

  3. 2. Linking the selectivity of varying surface phases of a real palladium catalyst toward specific methane oxidation pathways with Ambient Pressure X-ray Photoelectron Spectroscopy

    Master-uppsats, Lunds universitet/Synkrotronljusfysik; Lunds universitet/Fysiska institutionen

    Författare :Ulrike Küst; [2023]
    Nyckelord :APXPS; catalysis; palladium; methane; Physics and Astronomy;

    Sammanfattning : The study of heterogeneous catalysis, especially within methane oxidation, is of high importance in order to more efficiently remove unburned methane from bio-fuel exhausts. This is relevant as bio-fuel engines will replace those driven by fossil fuels in the coming decades. LÄS MER

  4. 3. The Efficiency of PV Modules: Expectations vs. Reality : A study of the Degradation of Solar Panels in Sweden

    Kandidat-uppsats, Uppsala universitet/Institutionen för samhällsbyggnad och industriell teknik

    Författare :Julia Forssblad; Linnea Lisper; Olivia Stålnacke; Vera Tonell; [2022]
    Nyckelord :;

    Sammanfattning : Solar energy is one of the fastest growing green energy sources worldwide today. Thepioneer modules in Sweden have been in use for quite some time. The aim of the reporthas been to examine how PV modules in Sweden have degraded a few years into theirlife cycle. This was accomplished using data from PV modules installed no later than2014. LÄS MER

  5. 4. A study of optical and structural properties of spin-coated V2O3 thin films on sapphire substrates

    Master-uppsats, Linköpings universitet/Institutionen för fysik, kemi och biologi

    Författare :Jennifer Silander; [2022]
    Nyckelord :Optical properties; transmittance; FTIR spectrometry; scanning electron microscopy; x-ray diffraction; metal-insulator transition; crystalline material; sol-gel; spin-coating; vanadium oxide; infrared light;

    Sammanfattning : Many transition metal oxides exhibit a Metal-Insulator Transition (MIT). This is an interesting phenomenon where the material undergoes a structural phase transition, and the electronic charge is redistributed in the crystal lattice. LÄS MER

  7. 5. Tribological behaviour of CVD diamondcoated tools during machining of highstrength aluminum alloy : Master thesis project on tribological behavior of super hard materials: chemicalvapor deposition diamond (CVD) coated cutting tools and polycrystalline diamond(PCD) cutting tools used in machining of high strength aluminium alloy

    Master-uppsats, Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)

    Författare :Oskar Lundquist; [2022]
    Nyckelord :CVD diamond coating; CVD; Aluminum machining; Tool coatings; PCD; diamond coating; diamond; Tribology; Material Science.;

    Sammanfattning : Machining of Aluminum can be complicated due to large amounts of adhesion and diffusion of the aluminum onto the cutting tool, causing effects such as built-up layers and built-up edges. This leads to poor surface finishes and can significantly affect the tool life. LÄS MER