Sökning: "pull-out test"
Visar resultat 6 - 10 av 13 uppsatser innehållade orden pull-out test.
6. Utdragskapacitet Sidokoppling Håldäck
Kandidat-uppsats, Högskolan i Halmstad/Akademin för ekonomi, teknik och naturvetenskapSammanfattning : To achieve structural integrity in precast concrete systems, connections between elements must be capable to transfer both vertical and horizontal loads which puts high demands on single ties. Hollow-core slabs are often used to stabilize the structural system which puts high demands on the connections between the slab and the buildings stabilizing units. LÄS MER
7. Dimensionering och praktiska försök av kopplingar i HD/F-plattor
Uppsats för yrkesexamina på grundnivå, Umeå universitet/Institutionen för tillämpad fysik och elektronikSammanfattning : Håldäck är en vanligt förekommande betongprodukt som ger lägre materialkostnadader och används bland annat där man önskar längre spännvidder för en öppnare planlösning. Strängbetong konstruerar, tillverkar och monterar prefabricerade betongelement där håldäck är en av de produkterna. LÄS MER
8. Utdragskapacitet för bygel och stång ingjuten i håldäckskanal
Kandidat-uppsats, Lunds universitet/Utbildningar i HelsingborgSammanfattning : There are high requirements regarding the connection between a hollow-core slab and the supporting wall or beam. One requirement is that the Connection must be able to withstand design loads parallel to the slab. LÄS MER
9. Performance Analysis of Unskewed Asymmetrical Rotor for LV Induction Motors
Master-uppsats, KTH/Elektrisk energiomvandlingSammanfattning : This master thesis presents a comparative analysis of the starting performance and losses at rated operation for a 15 kW, 4-pole industrial induction motor, mounted with standard skewed, unskewed and unskewed asymmetrical die-cast aluminium rotors through measurements and simulations. It is a well-known fact that rotor skewing suppresses the synchronous torques at low speeds and also reduces the audible noise of the machine. LÄS MER
10. Optimization of Weld Nut Geometry by Simulation
Master-uppsats, KTH/Industriell produktionSammanfattning : This project covers resistance projectionwelding of HP weld nuts and simulationsof these weld nuts welded to Dogal(350YP, 600DP, 800DP) and HyTens1000. When the simulation results werecompared to results in the previous report,Resistance Nut Welding of High StrengthSteel, it showed that the simulations ofHPM8 weld nuts were more accurate thenthe HPM6 simulations. LÄS MER