Sökning: "pure bending"

Visar resultat 1 - 5 av 19 uppsatser innehållade orden pure bending.

  1. 1. PARAMETRIC STUDY FOR WALL-TO-WALL CONNECTION IN MIXED STEEL CONCRETE STRUCTURES

    Master-uppsats, KTH/Bro- och stålbyggnad

    Författare :Simone De Troia; [2023]
    Nyckelord :;

    Sammanfattning : The objective of this thesis work is to study the connection between two Steel Concrete Structures (SCS) wall modules using embedded connection bars. The SCSs under investigation consist of two steel faceplates held together by tie bars, concrete is cast inside, and stress transmission between the concrete and the steel plates is provided by shear connectors as headed studs. LÄS MER

  3. 2. Novel steel hinge connection for pedestrian timber bridges : Novel steel hinge connection for pedestrian timber bridges

    Master-uppsats, KTH/Byggnadsmaterial

    Författare :Charlotte Jaeger; [2023]
    Nyckelord :;

    Sammanfattning : This study focuses on exploring a novel timber-to-timber joint using a steel hinge connection (in this work also referred to as door-hinge joint) for pedestrian timber bridges. To conduct the cross-section design of the structural bridge members, a numerical model was developed to determine the internal forces. LÄS MER

  4. 3. Analysis of Resin Impregnated Non-woven : In collaboration with Hitachi Energy

    Kandidat-uppsats, Uppsala universitet/Institutionen för materialvetenskap

    Författare :Ahmed Abdulkareem Najm Al-Saedi; Anders Hedenfeldt; Andrea García; Anna-Karin Kron; Cornelia Bergström; Lova Källkvist; [2022]
    Nyckelord :resin impregnated non-woven; bushings; composite; resin impregnated paper; tensile; bending; permeability; mechanical properties;

    Sammanfattning : High voltage bushings are the most critical components of power transformers. A common material used in bushings is resin impregnated paper (RIP). Hitachi Energy is investigating whether this can be replaced with a new material, resin impregnated non-woven (RIN). LÄS MER

  5. 4. Moment-resisting connections for glulam using birch plywood : An experimental study on both mechanical and adhesive connections

    Master-uppsats, KTH/Byggnadsmaterial

    Författare :Jonatan Ringaby; [2022]
    Nyckelord :;

    Sammanfattning : The aim of this study was to investigate the load-bearing capacity and stiffness of mechanical and adhesively bonded connections in timber structures with gusset plates made of birch plywood, as a preliminary study for potential future use in long-span timber structures which could reduce the environmental impact of the building sector by substituting steel with wood products in moment-resisting connections. Birch plywood was chosen for this study due to its high bending strength in comparison to plywood made of softwoods and its availability on the market. LÄS MER

  7. 5. Lärdomar från raset av Tarfalahallen - En experimentell studie av spikförbandets inverkan på stabiliteten ur plan

    Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/Avdelningen för Konstruktionsteknik; Lunds universitet/Institutionen för bygg- och miljöteknologi

    Författare :Rebecka Kvist; Hiba Alyaseen; [2021]
    Nyckelord :sidostabilisering; biaxiell; enaxiell; styvhet ur plan; vippning; spikförband; underspänd balk; Tarfalahallen; experimentella försök; lateral stabilization; biaxial; uniaxial; out of plane stiffness; lateral torsional buckling; nailed joint; Tarfala Hall; experimental testing; Technology and Engineering;

    Sammanfattning : I mars 2020 rasade Tarfalahallen i Kiruna. Idrottshallens takkonstruktion bestod av långa underspända limträbalkar upplagda på limträpelare. Balkarna var underspända med hjälp av två trycksträvor som stöttades med dragband av stål och anslutningen mellan trycksträvorna och balken bestod av spikförband. LÄS MER