Sökning: "purge flow"
Hittade 4 uppsatser innehållade orden purge flow.
1. Conceptualisation, Implementation and Commissioning of a Controlled Pyrolysis Rig : KTH Master Thesis Report
Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)Sammanfattning : Liquid methane has seen popular interest from industry and academia as a next-generation rocket fuel due to its favorable performance characteristics and potential for extra-terrestrial in-situ resource utilisation. Since the rocket combustion chamber and nozzle are subject to high heat loads, regenerative cooling is a standard method to achieve lower temperatures. LÄS MER
2. CFD Analysis of Pressure Instabilities in Stator-Rotor Disc Cavity Systems
Master-uppsats, Linköpings universitet/Mekanisk värmeteori och strömningsläraSammanfattning : The continuous demand to improve turbine performance has led manufactures to focus on aspects that have been previously considered of secondary importance such as the secondary air system. The purpose of this system is to cool the components and prevent ingestion of hot gas into the stator-rotor cavity that could lead to low frequency pressure fluctuations called Cavity Flow Instabilities. LÄS MER
3. CFD INVESTIGATION OF THE PURGE AIR INFLUENCE ON THE FLOW STRUCTURE AND BEHAVIOUR OF GAS TURBINE STAGE AND ROTOR-STATOR DISC CAVITY SYSTEM
Master-uppsats, KTH/Kraft- och värmeteknologiSammanfattning : Gas turbines operate with medium of very high temperatures, which requires using advanced materials for vanes and blades and sophisticated methods of their cooling. Other parts of the turbine have to be protected from contact with hot gases. Discs that hold vanes and blades are especially exposed to this danger. LÄS MER
4. 1D Turbine Design Tool Validation and Loss Model Comparison: Performance Prediction of a 1-stage Turbine at Different Pressure Ratios
Master-uppsats, KTH/Kraft- och värmeteknologiSammanfattning : This work concerns the validation of two 1D Turbine Design Tools, AXIAL by Concepts NREC and TML by GKN Aerospace, and is purely computational. By using the KTH Test Turbine as a reference frame, these two software programs were set up to simulate its performance, and the results consequently validated against existing experimental data from the turbine. LÄS MER