Sökning: "thermocalc"
Visar resultat 1 - 5 av 13 uppsatser innehållade ordet thermocalc.
1. Alloy adaptation towards accepting higher amounts of secondary material
Master-uppsats, Jönköping University/JTH, Material och tillverkningSammanfattning : The work presented aims to find microstructure and mechanical properties after remelting of aluman-16 alloy by using high pressure die casting (HPDC). Alloy has been casted with specific composition. The alumna-16 alloy has been casted in 2 different composition of different Si content of 0.22% and 0. LÄS MER
2. Heat Treatment and Secondary Phase Formation in FeCrNi Medium Entropy Alloys
Master-uppsats, KTH/MaterialvetenskapSammanfattning : The topics of high entropy alloys (HEA) and medium entropy alloys (MEA) have been heavily researched in recent years. A HEA usually consists of five or more base elements, and a MEA would have three or four base elements. LÄS MER
3. Design and Development of Light Weight High Entropy Alloys
Master-uppsats, Högskolan i Jönköping/JTH, Material och tillverkningSammanfattning : The main aim of this thesis was to design and develop new Aluminium based compositionally complex alloys (CCAs) using the high entropy alloy (HEA) concept, and to understand their evolution of microstructures during casting and also after the secondary process which is heat-treatment, and finally to evaluate their subsequent mechanical properties. Prior to the development of alloys, a computational technique ThermoCalc was used which helped in understanding the phase formation in various results. LÄS MER
4. Gradient formation in cemented carbides with 85Ni:15Fe-binder phase
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Tillämpad materialvetenskapSammanfattning : In today’s inserts used for metal cutting the binder phase consists of cobalt (Co).However, EU’s REACH programme and the U.S’s National Toxicity Programme(NTP) classified Co as toxic/carcinogenic. Therefore, there is a strong need toinvestigate alternative binder phases. LÄS MER
5. Metallurgical investigation in weldability of Aluminium Silicon coated boron steel with different coating thickness.
Kandidat-uppsats, KTH/MaterialvetenskapSammanfattning : Hot-pressed aluminium and silicon coated boron steel is used in the car industry where high tensile strength is of great importance, such as in the safety cage of a car where deformation has to be kept to a minimum in case of a collision. After hot-pressing the AlSi-boron steel shows excellent properties with high tensile strength, minimal spring back and also shows good protection against corrosion. LÄS MER