Sökning: "wire and arc additive manufacturing"

Visar resultat 1 - 5 av 10 uppsatser innehållade orden wire and arc additive manufacturing.

  1. 1. Wire and Arc Additive Manufacturing : Topology Optimised Vehicle Component

    Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Författare :Malte Petersson; [2022]
    Nyckelord :Wire and Arc Additive Manufacturing; Additive Manufacturing; WAAM; AM; Overhang; Cooling times; Simulation; Welding;

    Sammanfattning : Wire and arc additive manufacturing (WAAM) is a manufacturing method using a numerical controlled motion system and a welding system to additively manufacture three dimensional components. The motion system is programmed from three dimensional computer aided design model data (3D-CAD) of the intended geometry which is then sliced in to layers and welded on additively. LÄS MER

  3. 2. Hardware-in-the-loop based-real-time simulations in robotic additive manufacturing

    Master-uppsats, Linnéuniversitetet/Institutionen för maskinteknik (MT)

    Författare :Gurtej Singh; Ali Hajian Foroushany; [2022]
    Nyckelord :Parametric robotic programming; Material processing; Wire-arc additive manufacturing; hardware-in-the-loop simulation; Image processing; Real-time simulation in Matlab Simulink; Real-time target machine; SpeedGoat;

    Sammanfattning : Hardware-in-the-loop (HiL) is a concept for testing physical equipment by connecting itto a mathematical representation (model) of the physical process. HiL-testing reduces thecost and saves time before testing the physical equipment (hardware) on the real (physical)process. LÄS MER

  4. 3. Topologioptimering inom Svetsbaserad Additiv Tillverkning : applicerat på Pendelarm för Bandsystem

    Kandidat-uppsats, Högskolan Väst/Institutionen för ingenjörsvetenskap

    Författare :Tobias Hermansson; Daniel Lindh; [2022]
    Nyckelord :Produktutveckling; topologioptimering;

    Sammanfattning : Examensarbetet har genomförts inom området produktutveckling på institutionen för ingenjörsvetenskap. Delar av arbetet utfördes på produktionstekniskt centrum (PTC). LÄS MER

  5. 4. Fatigue and microstructural study of a 316L austenitic stainless steel marine component produced by Wire Arc Additive Manufacturing (WAAM)

    Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Tillämpad materialvetenskap

    Författare :Oskar Bremler; [2022]
    Nyckelord :Fatigue; steel; 316L; waam; wire arc additive manufacturing; AM; additive manufacturing;

    Sammanfattning : In this study, the fatigue- and fracture properties and microstructure of a marine component of austenitic stainless steel 316L manufactured with the novel method Wire Arc Additive Manufacturing were investigated and compared with data from literature. The purpose was to find a critical flaw size in the material related to its fatigue life. LÄS MER

  7. 5. Wire and Arc Additive Manufacturing : Pre printing strategy for torque arm

    Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Författare :Mattias Karlsson; Axel Magnusson; [2020]
    Nyckelord :wire; and; arc; additive; manufacturing; 3d printing; waam; wire and arc additive manufacturing; welding; toruqe arm; AM;

    Sammanfattning : Wire and Arc Additive Manufacturing (WAAM) is a novel Additive manufacturing method. It is a high deposition rate process which can be suitable for producing low to medium quantities of medium to large sized components. Because it is such a novel method, there are still somechallenges to solve for the method to be useful. LÄS MER