Avancerad sökning
Visar resultat 1 - 5 av 16 uppsatser som matchar ovanstående sökkriterier.
1. Accelerating Techniques for Whisky Maturation : Effect of heat, iron and light on the maturation process
Master-uppsats, Lunds universitet/Livsmedelsteknik och nutrition (master)Sammanfattning : The maturation of whisky is a long and complex process, the extremely long waiting time causes a large cost for new whisky distilleries, and without sufficient funding, it is hard to start a whisky business. To produce satisfying whisky products within the short term, accelerating the reaction during aging provides a promising approach. LÄS MER
2. 3D-printing med träEn möjlighet för framtiden?
Uppsats för yrkesexamina på grundnivå, Örebro universitet/Institutionen för naturvetenskap och teknikSammanfattning : 3D-skrivare har många användningsområden och de har blivit vanliga i många industrier.Idag talas det om att denna teknik kan vara en möjlig väg till mer hållbart byggande.Tekniken anses lovande inom byggproduktion bland annat för att det visat sig att den kanreducera materialspillet och ge kortare byggtider. LÄS MER
3. Hydrothermally carbonized wood as a component in biobased material for 3D-printing
L2-uppsats, KTH/Skolan för kemi, bioteknologi och hälsa (CBH)Sammanfattning : Consumers put higher demands on low environmental impact from the products they use, and the materials they consist of. As a result, more research is being made on finding environmentally friendly production techniques and materials. Hydrothermal carbonization (HTC) is a relatively environmentally friendly method that has been used in this study. LÄS MER
4. Recycling of concrete waste with wood waste through heating compaction
Master-uppsats, KTH/BetongbyggnadSammanfattning : Concrete, as primary building material, is widely used in most construction project. For this reason, large amounts of concrete waste were generated from construction and demolition. One way to reuse concrete waste is to use it as backfill material for landfilling and road bases. LÄS MER
5. Wood powder production with a novel milling technology : analysis of specific energy consumption and of the product’s bulk properties
Uppsats för yrkesexamina på avancerad nivå, SLU/Department of Forest Biomaterials and Technology (from 131204)Sammanfattning : The interest for lignocellulose biomass has grown strongly in the last decades due to its potential to substitute fossil fuels. Pre-processing of biomass is of-ten needed to enable utilization of its full potential. A common pre-processing step is milling where the biomass is fractionated into wood powder usable for e.g. LÄS MER