Sökning: "xrd"
Visar resultat 1 - 5 av 184 uppsatser innehållade ordet xrd.
1. Structural analysis of HZO thin film and electrode using X-ray diffraction
Kandidat-uppsats, Lunds universitet/Synkrotronljusfysik; Lunds universitet/Fysiska institutionenSammanfattning : Since its discovery in 2011, the ferroelectricity of thin films based on HfO2 has been studied intensively. In particular, thin films with a 1:1 ratio of HfO2 and ZrO2 (HZO) has been of great interest. The ferroelectricity arises from a non-centrosymmetric orthorhombic (o) phase of HZO whose prevalence is dependent on the processing conditions. LÄS MER
2. The Effect of Temperature Gradients During Intercritical Annealing of Advanced High Strength Steels : Method Development for Experimental Streamlining
Master-uppsats, KTH/MaterialvetenskapSammanfattning : The third-generation advanced high strength steels, AHSS, represent an opportunity for today’s steel development, where lighter materials with maintained strength and toughness are in demand. The unique properties of these materials often stem from a tailored microstructure. LÄS MER
3. Electrolytic Reduction of Iron Oxides in Molten Salt with a Mineralogical Investigation of Magnetite Ore of Tapuli
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserSammanfattning : This master's thesis covers an investigation of the reduction behavior of different iron oxides when electrolytically reduced with molten salt electrolysis (MSE). The tested iron oxides were wüstite (FeO), hematite (Fe2O3), magnetite (Fe3O4) and magnetite ore concentrate from the Tapuli deposit in Pajala, Norrbotten, Sweden. LÄS MER
4. Environmental Barrier Coatings to protect Ceramic Matrix Composites in next-generation jet engines
Master-uppsats, Högskolan Väst/Institutionen för ingenjörsvetenskapSammanfattning : Gas turbine engine efficiency needs to be raised in order to decrease fuel consumption, greenhouse gas emissions, and expenses. Efficiency may be improved in two ways: by reducing engine weight and raising intake temperatures. LÄS MER
5. Microstructure and Mechanical Investigation ofCarbides Particles Reinforced High AusteniticManganese Steel
Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : The objective of this study was to produce a metal matrix composite (MMC). This compositematerial proves highly suitable for scenarios involving abrasive wear, owing to the exceptionalhardness of carbide particles, in conjunction with the remarkable ductility and capacity for workhardening found in Hadfield steel. LÄS MER