Processdesign av emulsionsberedningssystem

Sammanfattning: At the request of Fresenius Kabi an emulsion preparation system was designed with a maximum production capacity of  15 L and minimum of 3 L emulsion. The system was required to consist of one oil-tank, one pre-emulsion tank, two storage tanks and one homogenizer. The storage tanks were positioned on a movable carriage on the left side of the homogenizer and the pre-emulsion tank and oil tank was placed on a separate frame on the right side of the homogenizer. All tanks were equipped with individual temperature control and a stand-alone parallel cleaning system was designed. The system also had to be optimized for the specific process and extensive calculations were done.  The emulsion system was designed using CAD-software and produced a detailed 3D-model. The tanks were designed from scratch and all other parts of the system consist of standardized components readily available. A list of the components in the system with manufacturer article number of all components was also produced. Actual drawings for the tanks were also made. The 3D-model and the list of components provide a good base for future construction of the system.