Bio-coal pre-treatmeant for maximized addition in briquettes and coke

Sammanfattning: Carbon dioxide emissions to the atmosphere today cause problems around the world. In Sweden, the steel production contributes significantly to carbon dioxide emissions. The steel industry challenge is to improve the metallurgical processes to decrease the carbon dioxide emissions. One way to reduce the emissions is to use renewable carbon sources. The blast furnace process is a counter current reduction process for ironmaking. Raw materials such as iron ore agglomerates, coke and slag formers are charged at the top of the furnace while oxygen-rich blast air and powdered coal are injected in the bottom. The gases produced by combustion rise through the burden on the top of the furnace. The combustion of carbon produces carbon monoxide which is the reducing gas used for the reduction of iron oxides to pig iron. The process is the highest producer of CO2 emissions in Sweden; biomass can partially replace fossil carbon in coal blends for cokemaking, coal powder for coal injection and coke in self-reducing briquettes.  The purpose of this project was to maximize the addition of biomass in coal blends for cokemaking and the addition in briquettes produced for the recovery of iron bearing rest products. The challenge with biomass in cokemaking is its low density and high reactivity which decrease the coke yield and coke strength at the same time that it increases the coke reactivity. The coke quality has to be kept at sufficient quality in order to avoid effects on productivity and process stability in the blast furnace. The addition of biomass in briquettes is limited due to the low density of the biomass which may affect the strength of the briquettes. The effect of the addition of sawdust in coke and briquettes has been studied to understand the effect on reaction behaviour of bio-coal. Heat-treatment of sawdust with high volatile coal was performed in order to achieve a coating of coal on the sawdust surface and get less reactive sawdust. Torrefied sawdust contained 23 wt. % fixed carbon while the pre-treatment of sawdust with high volatile coal increased the content to about 60 wt. %. Pre-treated sawdust was added to coal blend for coke making and briquettes containing iron oxide. The pre-treated sawdust was added to five coal blends for coke production, the contents were 5, 10 and 20 wt. %, and a base blend was used as reference. Coke reactivity, chemical composition and cold compression strength in coke were studied. This work resulted in an improved bulk density; up to 20 wt. % pre-treated sawdust could be added to the coal blend and still keep a bulk density of 800 kg/m3. The coke yields in cokes with pre-treated sawdust were comparable to the coke reference. The temperature at which carbon in coke began to be consumed was slightly higher in coke containing sawdust treated with 50 wt. % high volatile coal. It was estimated that the CO2 emission from fossil coal could be reduced with 8.6 % per ton hot metal (THM) with the addition of 10 wt. % pre-treated sawdust to coal blends for cokemaking. The addition of 20 wt. % pre-treated sawdust could reduce the CO2 emission with 10% per THM. In addition, two different mixes of briquettes were produced, one with torrefied sawdust and one with pre-treated sawdust. The chemical composition and reduction of iron oxides in briquettes was also studied and evaluated. Briquettes with treated sawdust were more compact, i.e. had a higher density than briquettes containing torrefied sawdust. The amount of hematite that could be added to the briquette mixes was 0.107 moles in briquettes with torrefied sawdust and 0.112 moles in briquettes with pre-treated torrefied sawdust.