Active rectification and control of magnetization currents in synchronous generators with rotating exciters : Implementation of the SVPWM algorithm using MOSFET technology

Sammanfattning: This thesis aims to design and build a power electronics system for the rectification and control of magnetization currents in synchronous generators with rotating exciters.The rotating exciter provides three-phase AC while the generator rotor needs DC with a high degree of control. The system needs to be able to rectify the three-phase AC to a stable DC without unwanted harmonic content, neither on the DC or the AC side. For control purposes it is also important that the current in the rotor can be changed very swiftly, preferably by several amperes during a single revolution ofthe machine.The system of choice is a synchronous rectifier bridge consisting of six MOSFET switches operated using the Space vector pulse width modulation (SVPWM) algorithm. This method gives a stable and controllable DC voltage while it keeps the harmonic content of the input currents at a minimum. However the DC voltage will always be higher than the peak line-to-line voltage from the exciter. To be able to lower the voltage below this value a Buck-converter is placed after the rectifier bridge.To gain a higher degree of control of the current density in the rotor windings the windings have been subdivided into three parts. To provide individual control of the current in the three rotor parts each part have been outfitted with a Push and Pull H-bridge.The proposed system has been both simulated using MATLAB Simulink and built and tested in the laboratory with satisfactory results.