Preparing parts for Wire and Arc Additive Manufacturing (WAAM) and net-shape machining

Sammanfattning: WAAM is a relatively unexplored additive manufacturing method. Although research in this area has been performed for some years and the hardware is relatively cheap, the method is not widely used. As the name suggest, it uses wire and an arc welding equipment to deposit beads on top of each other to create a geometry. As WAAM is a near net-shape method, the parts must be machined to its net-shape after the beads has been deposited. BAE Systems Hägglunds AB are investigating the use of WAAM in an industrial robot cell and this Master’s thesis has been written with the purpose of enabling the use of WAAM for manufacturing parts at the company. This report investigates how a part is prepared for WAAM and near net-shape machining. A formula for approximating the cost of manufacturing a part is investigated. A software for slicing a .STL file for generating a toolpath is developed in Matlab. The software then exports the toolpath to a code that the robot can read. It can also generate a digital model of the work piece for net-shape machining through CATIA macro. A model for calculating the cost of using the WAAM-cell once the toolpath for a part is known is presented. The investigated areas and the developed software are then applied to a part, and the results of the report is discussed.