Sökning: "load bearing structures"
Visar resultat 16 - 20 av 134 uppsatser innehållade orden load bearing structures.
16. Fallviktsförsök på skjuvarmerade betongbalkar
Kandidat-uppsats, KTH/Byggteknik och designSammanfattning : Standards and regulations for dimensioning of load-bearing structures are based on the response of load-bearing structures subjected to loads without variation in time. In the event of an accidental load, e.g. a collision or explosion, causes the load to have a rapid variation in the time resulting in a dynamic response. LÄS MER
17. Ingjutna ventilationskanalers påverkan på luftljudsisolering i flerbostadshus
Kandidat-uppsats, Umeå universitet/Institutionen för tillämpad fysik och elektronikSammanfattning : Good sound insulation is highly valued by Swedish tenants. To be able to achieve that, one must look at many aspects, such as room volumes, floor planes, flooring, but also what materials that are to be built with and how it ́s constructed. The use of cast-in ventilation ducts in the load-bearing structures is a common method in Sweden. LÄS MER
18. Structural strengthening and sustainability improvements of existing buildings – A case study
Master-uppsats, Linnéuniversitetet/Institutionen för byggteknik (BY)Sammanfattning : In Sweden, a large share of residential buildings was built more than 50 years ago. Consequently, old materials, poor maintenance, and corrosion can affect the structural performance of these buildings. Additionally, these buildings do not meet the latest energy efficiency and Eurocode regulations. LÄS MER
19. Moment-resisting connections for glulam using birch plywood : An experimental study on both mechanical and adhesive connections
Master-uppsats, KTH/ByggnadsmaterialSammanfattning : The aim of this study was to investigate the load-bearing capacity and stiffness of mechanical and adhesively bonded connections in timber structures with gusset plates made of birch plywood, as a preliminary study for potential future use in long-span timber structures which could reduce the environmental impact of the building sector by substituting steel with wood products in moment-resisting connections. Birch plywood was chosen for this study due to its high bending strength in comparison to plywood made of softwoods and its availability on the market. LÄS MER
20. Rotor Dynamic Modeling of Hydropower Rotors by 3D-Finite Element Analysis
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : By using the rotor dynamic capabilities of Simcenter Nastran Rotordynamics, an eigenvalue analysis of 3D-finite element models of the Jeffcott rotor and the overhung rotor were conducted and compared to the results with beam-based, lumped parameter models. The first two critical speeds of the Jeffcott rotor were estimated with variations of 3. LÄS MER