Sökning: "multi-point"
Visar resultat 1 - 5 av 12 uppsatser innehållade ordet multi-point.
1. Detecting Chromatography Unit Degradation : Comparison of single- and multi-point techniques implemented in system control and monitoring software
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Signaler och systemSammanfattning : Chromatography units, used in the production of pharmaceuticals, degrade with use and need to be changed or repackaged. This study investigates the effectiveness of two statistical methods, principal component analysis and simple and one-point multiparameter technique, for determining degradation in the Fibro chromatography unit. LÄS MER
2. Reducing Inter-cell Interference Using Machine Learning
Master-uppsats, Lunds universitet/Institutionen för elektro- och informationsteknikSammanfattning : One way of meeting the increasing demand for higher data rates is by building denser cellular networks in order to maximize the use of the frequency spectrum. The denser deployment leads to an increased probability of inter-cell interference, the phenomenon where the signal quality experienced by a user served by a cell is lowered because of the transmission from neighboring cells in the network. LÄS MER
3. Multiple CubeSat Mission for Auroral Acceleration Region Studies
Master-uppsats, Luleå tekniska universitet/Institutionen för system- och rymdteknikSammanfattning : The Auroral Acceleration Region (AAR) is a key region in understanding the interactionbetween the Magnetosphere and Ionosphere. To understand the physical, spatial, and temporal features of the region, multi-point measurements are required. LÄS MER
4. Concept Generation Techniques for Machine Tool Design
Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)Sammanfattning : Technological advancements are reaching new milestones in modern world. The demand for innovations and discoveries in each field is growing greater. This is the challenge in front of product designers. This thesis is about designing a mechanism for a machine tool. LÄS MER
5. Material parameter identification of a thermoplastic using full-field calibration
Master-uppsats, Linköpings universitet/Mekanik och hållfasthetsläraSammanfattning : Finite element simulation of thermoplastic components is gaining importance as the companies aim to avoid overdesign of the components. Cost of the component can be minimized by using an adequate amount of material for its application. LÄS MER