Design, Fabrication and Validation of High-permittivity Low-loss Microwave Material for Biomedical Sensor

Sammanfattning: Abstract The purpose of this task is to synthesize a dielectric substrate material through a sintering process, which can be used for non-invasive physiological sensor development. Low loss, high dielectric constant ceramic material is used. Sintering process is employed to ensure stable structure and homogeneous dielectric properties of the substrate. Samples were prepared with TiO2 and in combination with CuO and Al2O3. All samples were measured and validated in 500 MHz to 20 GHz frequency range. Characterization measurements were performed with a Vector Network Analyzer, FieldFox N9918A, and connected to Keysight, open ended coaxial probe and performance probe. Reflection based measurement method was used due to its simplicity, speed and requirement of wideband data. The dielectric measurement results of developed samples show non-frequency dispersive behaviour, high dielectric constant and data was also selected at 2.45 GHz in aligned to the industrial, scientific and medical band. The resulting measurements show the highest dielectric constant of 16.6 at 2.45 GHz with a very low loss behaviour.