Sökning: "Design for assembly"

Visar resultat 1 - 5 av 580 uppsatser innehållade orden Design for assembly.

  1. 1. Implementation of Level of Development for BIM Collaboration in Timber Building Subsystems Design: A Case Study of I-Joist Construction Elements

    Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurser

    Författare :Isabell Gustafsson; [2024]
    Nyckelord :BIM; I-Joist; LOD; Level of Development; Timber Building Subsystems;

    Sammanfattning : Due to time, cost, and environmental challenges, wood has become a more common building material even for more complex buildings. Implementing the concept of Level of Development (LOD) on timber structures could provide a tool for BIM collaboration that may save cost and time, and in the early stages mediate wood as an available building material. LÄS MER

  3. 2. Cost-Effective Design Solution for GAIM Shooting Trigger PCB & Improving the Power Distribution Network

    Master-uppsats, Lunds universitet/Institutionen för elektro- och informationsteknik

    Författare :Marko Pajovic; [2024]
    Nyckelord :Technology and Engineering;

    Sammanfattning : Virtual Reality (VR) shooting simulators have gained popularity as effective training and entertainment tools. GAIM is a Swedish company specializing in VR shooting simulators, offering VR headsets with physical dummy guns and rifles. LÄS MER

  4. 3. Conjugate Heat Transfer Analysis of HPGP Thruster

    Master-uppsats, Luleå tekniska universitet/Rymdteknik

    Författare :Lisa Svensson; [2024]
    Nyckelord :aerospace; HPGP; ECAPS; ANSYS; conjugate heat transfer; thruster; space;

    Sammanfattning : This master's thesis was conducted in collaboration with ECAPS, where a conjugate heat transfer analysis on their High Performance Green Propulsion (HPGP) 22N thruster was done. ECAPS is a Swedish propulsion company specializing in green propulsion. They develop thrusters for spacecraft orbit and attitude control, utilizing the propellant LMP-103S. LÄS MER

  5. 4. Modularization of High Voltage Section

    Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)

    Författare :Johan Rósen; Roine Penttilä; [2023]
    Nyckelord :Modularization; High voltage; Traction; Frame configuration; Rail vehicle; Modularisering; högspänning; drivsystem; ramkonfiguration; tågfordon;

    Sammanfattning : Today, Alstom has several types of High-Voltage sections (HV), which are adapted for every new type of train. Some are very similar in size and components and others are more different. LÄS MER

  7. 5. Konceptstudie kring snabb-fästen för skärutrustning till en motorsåg

    M1-uppsats, Jönköping University/JTH, Industriell produktutveckling, produktion och design

    Författare :Emil Gustafsson; Marcus Wallén; [2023]
    Nyckelord :;

    Sammanfattning : This report describes a thesis project together with Husqvarna Group at the Advanced Development Handheld department. The aim of the project was to develop a prototype for a more efficient rapid bar exchange for one of Husqvarnas chainsaws. The reason for this is that the current design for changing the bar and chain is time consuming. LÄS MER