Sökning: "wet clutch"

Visar resultat 1 - 5 av 12 uppsatser innehållade orden wet clutch.

  1. 1. Provrigg för Våta Lamellkopplingar

    Uppsats för yrkesexamina på grundnivå, Örebro universitet/Institutionen för naturvetenskap och teknik

    Författare :Hampus Luthman; Allan Nordin; [2022]
    Nyckelord :Clutch; Test rig; Frictions discs; Drag losses; Duoprop; Spray oil; Koppling; Provrigg; Lameller; Dragförluster; Duoprop; Sprutolja;

    Sammanfattning : Denna rapport avser det examensarbete som har utförts i samarbete med AB Volvo Penta under vårterminen 2022. Arbetet beskriver produktutvecklingsprocessen för en lamellprovrigg.Volvo Penta i Köping utvecklar och tillverkar transmissioner för marint bruk. LÄS MER

  3. 2. Self-locking Brake used in Reversible Sailboat Winches : Development of a self-locking braking system that will be used to allow sailboat winches to reverse

    Master-uppsats, Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)

    Författare :Lukas Andersson; [2022]
    Nyckelord :Sailing; Sailboat; Sailboat Winch; Reversible Winch; Winch Brake; Brake; Disk Brake; Cone Brake; Wet Brake; Brake Calculation; Seldén; Seldén Mast; One Way Clutch; One Way Bearing; Over running Roller Clutch; Electric Winch; Electric Sailboat Winch; E40i; Self Locking Brake;

    Sammanfattning : Sailboat winches are used to help sailors manipulate the control lines that control the position and shape of the sails. Unlike most winches sailboat winches usually only have the ability to winch in the rope, but not to reverse. To reverse the line a sailor needs to manually manipulate it, this is both inconvenient and can also be a safety hazard. LÄS MER

  4. 3. Dynamic Torque Modeling of a Wet Lamella Clutch Pack

    Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/Industriell elektroteknik och automation

    Författare :Jacob Wallersköld; Johan Appelros; [2021]
    Nyckelord :wet lamella clutch; friction modeling; torque modeling; torque accuracy; force measurements; system identification; grey-box modeling; Technology and Engineering;

    Sammanfattning : Wet lamella clutches are used in the automotive industry to enable all-wheel drive and thereby increase acceleration, handling and safety of cars. The clutches work by transmitting torque from an incoming- to an outgoing shaft through a series of lamella - steel-disc friction surfaces (lamella pack), lubricated by an oil. LÄS MER

  5. 4. Prediction of life durability in friction for wet clutches of DCT gearboxes

    Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Författare :Lars-Johan Sandström; [2020]
    Nyckelord :wet clutch; DCT; Gearbox; Durability; Friction; Life; Dual Clutch Transmission;

    Sammanfattning : Many new cars are equipped with automatic transmissions. These gearboxes often have a dual clutch transmission (DCT) that has a built-in wet clutch. The lubricants used in these gearboxes is often very advanced because it must take care of two systems, the wet clutch and the gears. There is always a strive to make the drain intervals longer. LÄS MER

  7. 5. Evaluations of Vibrations in a Wet Clutch

    Uppsats för yrkesexamina på grundnivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Författare :David Sandlund; Oskar Wintercorn; [2019]
    Nyckelord :Haldex; BorgWarner; Friction; Vibrations; Wet Clutch; Tribology; 4wd; four wheel drive; all wheel drive; awd;

    Sammanfattning : BorgWarner Powerdrive Systems is constantly developing the performance of wet clutches used in passenger car all-wheel drive systems. The Haldex limited slip coupling, LSC, is the trade name of the all-wheel drive system sold and developed by BorgWarner Powerdrive Systems. LÄS MER