Sökning: "LDPE"
Visar resultat 6 - 10 av 44 uppsatser innehållade ordet LDPE.
6. Effect of strain rate on continuum and pre-cracked polymer failure
Master-uppsats, Blekinge Tekniska Högskola/Institutionen för maskinteknikSammanfattning : The main intention of this thesis work was to investigate the effect of strain rate on continuum and pre-cracked polymer failure. Low-Density Polyethylene (LDPE) was chosen to study experimentally and numerically. In order to cover wide range of strain rates, four specific strain rates were selected for the uniaxial tensile tests. LÄS MER
7. Accelerated aging of cellulose-based composites in different climate environments : A project provided by Biofiber Tech Sweden AB
Kandidat-uppsats, Uppsala universitet/Institutionen för kemi - ÅngströmSammanfattning : This paper reviews the effects of accelerated aging with increased humidity and temperature on cellulose-based composites. The composites consist of a matrix of plastic reinforced with cellulose fibers. The company Biofiber Tech Sweden AB provided four different composites and a conventional polyolefin as reference. LÄS MER
8. Conceptual design and construction of a UAV wing structure
Kandidat-uppsats, KTH/Skolan för teknikvetenskap (SCI)Sammanfattning : This report presents the design of the wing structure for a UAV called Skywalker X8. A model of the UAV was given and analyzed to design a wing box structure that is twice the size of the current model, with "greener" technology and lightweight materials. LÄS MER
9. Bionedbrytning och mikroplastbildning i akvatiska miljöer : Utvärdering avanalystekniker
M1-uppsats, Högskolan i Borås/Akademin för textil, teknik och ekonomiSammanfattning : Plastproduktionen har ökat kraftigt i världen sedan 1950-talet, därmed även förekomsten av plastavfall som ansamlas i naturen. Det pågår flera initiativ på internationell nivå för att förebygga och hantera förekomsten av mikroplast i haven och en viktig aspekt för att minska miljöpåverkan från plastavfall är att öka användandet av bionedbrytbara material. LÄS MER
10. Characterization of thin laminate interface by using Double Cantilever Beam and End Notched Flexure tests
Master-uppsats, Blekinge Tekniska Högskola/Institutionen för maskinteknikSammanfattning : This thesis is intended to identify the mode I and mode II fracture toughness to characterize the thin laminate interface by using the Double Cantilever Beam test (DCB) and End Notched Flexure test (ENF). This study’s thin laminate was Polyethylene Terephthalate and Low-Density Polyethylene (PET-LDPE), which is mostly used by packaging industries in the manufacturing of packages to store liquid food. LÄS MER