Sökning: "Simplified models"
Visar resultat 1 - 5 av 360 uppsatser innehållade orden Simplified models.
1. Aerodynamics simulations of Scania trucks using OpenFOAM
Master-uppsats, KTH/Teknisk mekanikSammanfattning : In the field of heavy-duty vehicles, fuel efficiency and environmental protection are factors that need to be focused on, while the aerodynamic drag generated during vehicle travelling is one of the most influential aspects. This thesis delves into the aerodynamic simulation of Scania trucks using the open-source Computational Fluid Dynamics (CFD) tool, OpenFOAM v2206. LÄS MER
2. Evaluation and Optimization of LTE-V2X Mode 4 under Aperiodic Messages of Variable Size
Master-uppsats, Lunds universitet/Institutionen för elektro- och informationsteknikSammanfattning : Vehicular networks connect vehicles for improved road safety and efficiency with the assistance of wireless information exchange. Vehicular networks are based on the frequent broadcast of awareness messages referred to as CAM (Cooperative Awareness Messages) or BSM (Basic Safety Message) in the ETSI and SAE standards, respectively. LÄS MER
3. Hybrid bridge deck of timber and corrugated steel plates
Master-uppsats, KTH/ByggnadsmaterialSammanfattning : Over the years, hybrid structures composed of timber and steel have become a potential alternative to conventional solutions. Recently, corrugated steel plate (CSP) has become more and more popular in structures such as shear walls and roofs due to its favorable mechanical properties. LÄS MER
4. Dynamic simulation and 3D visualization of a floating tilted counter-rotating vertical axis offshore wind turbine
Kandidat-uppsats,Sammanfattning : The growing global demand for clean energy is critical, and wind power plays a crucial role in addressing this need. The increasing demand is driving advancements in the field of offshore wind power and one promising innovation is the counter-rotating vertical axis turbines (CRVT), specifically designed for floating wind power installations. LÄS MER
5. Virtual Sensing for Cluster Vacuum Control
Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)Sammanfattning : The purpose of this project was to develop a virtual sensing model in order to estimate the vacuum level in the milking cluster with data collected further along the milk tube. Measuring the cluster vacuum level is desirable for many applications, such as control and monitoring, but due to the cow's tendency to kick, chew and stomp on anything within reach, placing a sensor in or close to the cluster is both difficult and impractical. LÄS MER