Sökning: "Combustion Techniques"

Visar resultat 26 - 30 av 72 uppsatser innehållade orden Combustion Techniques.

  1. 26. The feasibility of producing and utilizing bioenergy in Linga Linga, Mozambique : Potential resources, conversion techniques and applications

    Kandidat-uppsats, KTH/Hållbar utveckling, miljövetenskap och teknik

    Författare :Mila Ebrahim; Fanny Lilja; [2019]
    Nyckelord :anaerobic digestion; biochar; biomass; bioenergy; biomass combustion; charcoal; gasifier cookstove; sustainable bioenergy;

    Sammanfattning : The aim of the project was to investigate the possibility of producing and utilizing bioenergy from available local resources in the village Linga Linga, Mozambique. Suitable conversion techniques for producing and utilizing bioenergy were identified through a literature study. LÄS MER

  3. 27. Development of Spectroscopic Measurements for Raman and Thomson Scattering Diagnostics ——Applications in Combustion and Plasma

    Master-uppsats, Lunds universitet/Fysiska institutionen; Lunds universitet/Förbränningsfysik

    Författare :Miaoxin Gong; [2019]
    Nyckelord :Raman scattering; Raman spectroscopy; Thomson scattering; stray light suppression; periodic shadowing; high dynamic range imaging; digital micro-mirror device; DMD; laminar flames; combustion; gas discharge; plasma; laser diagnostics; spectrometer; improved spectroscopy; spectroscopy; Physics and Astronomy;

    Sammanfattning : This thesis work concerns methods for improved spectroscopy including stray-light suppression, dynamic range improvement and signal enhancement. These methods were applied in Raman and Thomson- scattering spectroscopy in combustion and plasma. LÄS MER

  4. 28. Stochastic Knock Control for Improved Efficiency

    Master-uppsats, Linköpings universitet/Fordonssystem

    Författare :Jonas Vedin; Robert Widén; [2019]
    Nyckelord :Knock control; Stochastic knock control; Knock simulation;

    Sammanfattning : Increasing the efficiency and performance of internal combustion engines is always of interest in the automotive industry. One limiting factor to achieve this in gasoline combustion engines is the ignition timing which can not always be set where optimal ignition efficiency and performance is obtained. LÄS MER

  5. 29. Evaluation of Different Concepts for Pressed and Sintered Connecting Rods

    Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Författare :Mattias Rehn; [2019]
    Nyckelord :Connecting Rod; Con Rod; Fatigue; Buckling; Manufacturing; Höganäs AB; CAD; FEM; FEA;

    Sammanfattning : Connecting rod are found in most combustion engines and transmits thrust from the piston to the crankshaft. The connecting rod needs to withstand forces from the piston and inertia forces which results in axial tension, compression stresses and bending. LÄS MER

  7. 30. Combustion Simulations with reduced mechanisms using hybrid optimization

    Kandidat-uppsats, Lunds universitet/Fysiska institutionen; Lunds universitet/Förbränningsfysik

    Författare :Marius Burman Ingeberg; [2018]
    Nyckelord :Optimization; Reduced mechanism; Hybrid optimization; simulated annealing; Genetic algorithm; Physics and Astronomy;

    Sammanfattning : In order to simulate complex combustion systems, the kinetic mechanisms describing the chemical processes have to be reduced. To minimize the error introduced by the reduction, coefficients of the reaction rates included in the mechanisms can be adjusted in ways so that simulations using the reduced mechanism behave like simulations that use detailed mechanisms. LÄS MER