Sökning: "Mechanical Properties"

Visar resultat 11 - 15 av 995 uppsatser innehållade orden Mechanical Properties.

  1. 11. The effect of recycling and processing routes on recrystallization in a secondary 3xxx aluminium alloy

    Master-uppsats, Jönköping University/JTH, Material och tillverkning

    Författare :Anton Rolseth; [2023]
    Nyckelord :Aluminium alloys; sheet metal forming; grain boundary segregation; recrystallization; Zener pinning; casting; rolling;

    Sammanfattning : Aluminium alloys have the possibility to be infinitely recycled. By only generating 5% of the emissions compared to primary aluminium, great CO2 savings can be made. One of the issues in manufacturing components entirely from post-consumer scrap is the presence of trace elements and impurities. Such elements can be Fe, Cu, Cr, P and Pb. LÄS MER

  3. 12. Influence of pulsing on PVD TiAlN coating microstructure and mechanical properties : Master thesis project on the impact of deposition parameters on performance and properties of PVD titanium aluminum nitride.

    Master-uppsats, Karlstads universitet

    Författare :Marcus Roseen; [2023]
    Nyckelord :;

    Sammanfattning : This thesis investigates the influence of pulsing on the mechanical properties of PVD TiAlN coatings. The thesis focuses on defects caused by droplets during the arc-evaporation technique by altering the duty time, which affects mechanical properties. LÄS MER

  4. 13. Effect of Trace Elements on the Particle Size of Magnesium Silicide in Aluminium Extrusion : The Use of Thermo-Calc and DICTRA in order to Produce Aluminium more Efficiently

    Kandidat-uppsats, KTH/Materialvetenskap

    Författare :Gustav Boustedt; Johan Alexander Valentin Nygren; Gustav Strandgård; [2023]
    Nyckelord :Thermo-Calc; DICTRA; simulations; EN AW 6082; extrusion; particle precipitation; Mg2Si; sustainable; trace elements; aluminium;

    Sammanfattning : This project is a feasibility study for Hydro Extrusion Sweden AB, a company that produces extruded aluminium profiles. The main purpose of this project was to analyse the difference of Mg2Si particle sizes in aluminium alloys when varying parameters, such as cooling rate and composition, in aluminium extrusion, particularly the EN AW 6082 alloy. LÄS MER

  5. 14. Formulation and characterisation of novel edible-packaging for fruits and vegetables

    Master-uppsats, Lunds universitet/Livsmedelsteknik och nutrition (master)

    Författare :Lola Sutton; Katerina Papa; [2023]
    Nyckelord :algae; edible packaging; carrageenan; cucumber; REL; oxidative stress; antioxidants; food engineering; Technology and Engineering;

    Sammanfattning : This master's thesis investigated the potential of algae raw materials, specifically k-carrageenan and to a lesser extent alginate, as film-forming ingredients for the development of a novel edible packaging solutions. The project involved the testing and characterisation of several active ingredients of algal and plant origins both as extracts and as ingredients in films. LÄS MER

  7. 15. Evaluating the feasibility of chitosan as an adhesive for wood laminates and as a matrix for transparent wood

    Master-uppsats, KTH/Fiber- och polymerteknologi

    Författare :Nihar Sakhadeo; [2023]
    Nyckelord :Transparent wood; Chitosan; Biobased adhesives; Biopolymers; Laminate; Transparent trä; Kitosan; Biobaserad adhesiv; Biopolymer; Laminat;

    Sammanfattning : En av grundpelarna i alla hållbara system är införandet av en cirkulär ekonomi, som främjar återanvändning och återvinning av material. Plast är en av i utmaning i detta avseende på grund av den stora produktionsvolymen variation i sorter och långsamma nedbrytn. LÄS MER