Sökning: "Per Huang"
Visar resultat 1 - 5 av 7 uppsatser innehållade orden Per Huang.
1. Is two stage GAC better than one stage GAC for removing PFAS at a DWTP? : Investigation of PFAS removal from drinking water using two stage granular activated carbon (GAC) filter
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/Institutionen för geovetenskaperSammanfattning : The removal of 34 per- and polyfluoroalkyl substances (PFAS) were compared in a 1 stagegranular activated carbon (GAC) filtration to a 2 stage GAC filtration in a pilot study at adrinking water treatment plant (DWTP). The PFASs that were present in the water wereperfluorooctanoic acid (PFOA), perfluorooctane sulfonic acid (PFOS), perfluoropentanoic acid(PFPeA), perfluorohexanoic acid (PFHxA), perfluoroheptanoic acid (PFHpA), perfluorobutanesulfonic acid (PFBS), perfluoropentane sulfonic acid (PFPeS) and perfluorohexane sulfonic acid(PFHxS). LÄS MER
2. Queryable Workflows: Extending Dataflow Streaming with Dynamic Request/Reply Communication
Master-uppsats, KTH/Skolan för elektroteknik och datavetenskap (EECS)Sammanfattning : Stream processing systems have been widely adopted in applications such as recommendation systems, anomaly detection, and system monitoring due to their real-time capabilities. Improving observability in stream processing systems can further expand their application scenarios, including the implementation of stateful serverless applications. LÄS MER
3. Design and manufacturing of SLM printed tooling for plastic injection molding
Master-uppsats, Jönköping University/Tekniska HögskolanSammanfattning : The thesis work is to show that the use of SLM (Additive Manufacturing) compared with the traditional process to make injection molds will have advantages in design, especially in waterways. This thesis work gives seven different versions of design applied to the SLM method to analyze and compare them in Solidworks® and Moldflow® to figure out what design is suitable for the SLM method. LÄS MER
4. Metoder för inventering av väg : Vid Ramböll Sverige AB
M1-uppsats, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserSammanfattning : Detta examensarbete har utförts på uppdrag av Ramböll RST i Luleå. Syftet har varit att beskriva metod och process för arbetet med väginventering. Det har lagts särskild vikt vid att beskriva för- och nackdelar med nuvarande metoder. LÄS MER
5. Analys av bärbara datorer med avseende på återproduktionsegenskaper
Kandidat-uppsats, KTH/Industriell produktionSammanfattning : Den snabba befolkningstillväxten och teknikutvecklingen leder till en konsumtionsökningav elektronikprodukter. Det skapar en stor mängd elektronikavfall och avfallsmängden ökar med 4 % per år, vilket gör elektronikavfall till den snabbast växande avfallskällan. LÄS MER