An investigation of some properties of Shredder Fines and an element analysis of its ash to find new ways of dealing with this waste

Sammanfattning: Shredder fines are the materials with a particle size of less than 10 mm resulting from the shredding of vehicles and complex metal scrap from industries and municipalities. This waste is currently used as landfill construction material, but Stena Recycling wanted to know whether the bottom ash from the combustion of this waste could be useful to the cement industry, and whether it would be feasible to extract Cu and Zn from this ash. To determine this the shredder fines were combusted, and the generated bottom ash underwent chemical fractionation. The leachates from this were processed using MP-AES to obtain an elemental analysis of the ash. The uncombusted shredder fines had its moisture content and calorific value determined. The shredder fines had a moisture content of approximately 11%wt. Due to the heterogeneity of the shredder fines the calorific values varied significantly across the tested samples. The average value was 7.8 MJ/kg. The chemical fractionation showed that the elements in the ash are mostly insoluble in water and ammonium acetate, as the majority remained in the solid residue. This indicates that the ash is inert, and not susceptible to heavy metal leaching. The elemental analysis showed that there is a significant amount of Fe in the ash, with reasonable amounts of Cu and Zn. This project concluded that without additional processing the ash would not be suitable for the cement industry, and that there is potential for the recovery of Cu and Zn from the ash.