Sökning: "Profilometer"

Visar resultat 1 - 5 av 27 uppsatser innehållade ordet Profilometer.

  1. 1. Effects of materials and texturing on wettability of ski base

    Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Författare :ROSHAN SWAR; [2022]
    Nyckelord :Cross-country skiing; Stone grinding; UHMWPE;

    Sammanfattning : Cross-country skiing has turned into the most highly competitive winter sport, with skiers having the ability to win by merely milliseconds. Every year researchers, ski - technicians, and athletes come together to prepare the ski base surface that gives the best possible results. LÄS MER

  3. 2. Mechanical and tribological characterization of additive manufactured Co-alloyed tool steels aimed for cutting tool bodies

    Magister-uppsats, Högskolan Dalarna/Institutionen för information och teknik

    Författare :Jijesh Rajan; [2022]
    Nyckelord :Maraging steels; Selective laser melting; microstructure; wear; Modified 18Ni300; Osprey MAR;

    Sammanfattning : A drill tool body operates under tough cutting conditions where it is subjected to severe rubbing at the drill flute margin by the sliding chips. The tool wear caused by the contact stresses of the high-speed sliding chips is one of the common damage mechanisms observed in drill tool bodies. LÄS MER

  4. 3. Chemical Mechanical Polishing of InSb

    Master-uppsats, Lunds universitet/Institutionen för elektro- och informationsteknik

    Författare :David Linehan; [2021]
    Nyckelord :CMP; InSb; Chemical Mechanical Polishing; Indium; Antimonide; AFM; Profilometer; Ultrasonic; PVA; Smooth; Rough; Etch; Planarization; Technology and Engineering;

    Sammanfattning : .... LÄS MER

  5. 4. Relating Process Data to Product Quality in Transmission Manufacturing

    Master-uppsats, KTH/Industriell produktion

    Författare :Claudia Tensi; [2021]
    Nyckelord :;

    Sammanfattning : Research has shown that vibration produced by a machine tool provides useful information for the maintenance of its structural parts. Thus, the vibration signal should also give information about tool wear and, consequently, surface roughness of the machined workpieces. LÄS MER

  7. 5. Post-processing for roughness reduction of additive manufactured polyamide 12 using a fully automated chemical vapor technique - The effect on micro and macrolevel

    Master-uppsats, KTH/Skolan för kemi, bioteknologi och hälsa (CBH)

    Författare :Ingrid Johansson; [2020]
    Nyckelord :Chemical post-processing; PostPro3D; selective laser sintering; surface roughness; polyamide 12; Kemisk efterbehandling; PostPro3D; selektiv lasersintring; ytojämnhet; polyamid 12;

    Sammanfattning : Additive manufacturing has increased in popularity in recent years partly due to the possibilities of producing complex geometries in a rapid manner. Selective laser sintering (SLS) is a type of additive manufacturing technique that utilizes polymer powder and a layer-by-layer technique to build up the desired geometry. LÄS MER