Sökning: "surface resistivity"
Visar resultat 1 - 5 av 44 uppsatser innehållade orden surface resistivity.
1. The Influence of Roughness on Electrical Properties of Single Rock Fractures
Master-uppsats, KTH/Hållbar utveckling, miljövetenskap och teknikSammanfattning : To investigate the relationship between the structural characteristics of rough single fracturesand the electrical properties of the rock. In this study, a series of physical models of roughand smooth single fractures were established using the finite element method and Ohm's lawto test the electrical conductivity. LÄS MER
2. Application of ERT for Quality Assurance in Jet Grouting Columns; A development of an alternative quality control
Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/Teknisk geologi; Lunds universitet/Väg- och vattenbyggnad (CI)Sammanfattning : With the increased urbanization major cities are facing, expansion of larger facilities and households are inevitable. Expansion means larger areas of the surface needs to be used where the risk of varying subsurface soil properties increases with larger surface areas. LÄS MER
3. Feasibility Study of Resistivity Measurement of Metal Surfaces to Address Potential Dislocations Caused by Surface Conditioning
Master-uppsats, Uppsala universitet/FREIASammanfattning : High electrical fields are needed inside the accelerating cavities of particle accelerators in order to accelerate the particles to higher energies in shorter distances. But high electrical fields will lead to electrical breakdowns. LÄS MER
4. Developing data processing program for a new radio magnetotelluric (RMT) instrument
Kandidat-uppsats, Uppsala universitet/GeofysikSammanfattning : The radio magnetotellucic (RMT) method originates from (Tikhonov, 1950) and (Cagniard,1953) who discovered the possibility to estimate resistivity in the Earth’s subsurface using naturally occurring telluric currents. This through measuring the surface impedance of electromagnetic waves. LÄS MER
5. Additive Manufacturing of Strain Gauges : A Study of the Feasibility of Printing Strain Gauges Using Inkjet Printing
Master-uppsats, Uppsala universitet/Institutionen för materialvetenskapSammanfattning : Additive manufacturing (AM) also commonly known as 3D-printing is a manufacturing method which creates parts from adding layer into another. In the field of printed electronics Inkjet printing (IJP) and Aerosol Jet printing (AJP) are the most common AM techniques. LÄS MER