Sökning: "composite girder"
Visar resultat 1 - 5 av 11 uppsatser innehållade orden composite girder.
1. FE-Modelling of Composite Girder tests
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserSammanfattning : Many of the existing steel-concrete bridges may need to be strengthened, as heavier vehicles areallowed on the Swedish roads. These bridges could possibly be strengthened by post-installingshear connectors. The shear connectors may enhance the load-bearing capacity through a higherdegree of composite action between the steel and concrete interface. LÄS MER
2. Strengthening of non-composite bridges by Partial Composite Action
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserSammanfattning : A common bridge type is the steel-concrete bridge where the concrete deck is built over steel girders. In many earlier designs the bridge type was often built as non-composite, which means that the concrete deck and the steel girder has no shear connection at the steel-concrete interface and therefore bend as individual components. LÄS MER
3. Non-Linear FE-Analysis of a Composite Action Girder with Coiled Spring Pins as Shear Connectors
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserSammanfattning : For bridges to cope with increased requirements such as increased loads, strengthening work can be carried out. In cases where older steel-concrete bridges do not have a composite action, an alternative is to create composite-action to achieve a higher flexural strength. It is introduced by post-installing shear connectors. LÄS MER
4. Utmattning vid svetsad anslutning mellan tväravstyvning och fläns i samverkansbro
Kandidat-uppsats, KTH/Byggteknik och designSammanfattning : Vid samverkansbroar fästes tvärförband mellan huvudbalkar med funktion att leda laster ut mot huvudbalkarna. Dessa kan fästas via s.k. livavstyvningsplåtar mot huvudbalkens liv samt flänsar. LÄS MER
5. Klimatoptimering av broar - Åtgärder vid projektering för reducering av växthusgasutsläpp med LCA
Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/Avdelningen för KonstruktionsteknikSammanfattning : In 2017 the Swedish Parliament implemented a new national goal for limiting climate change. The goal is to have zero net emissions of greenhouse gases by year 2045 which will ultimately lead to negative net emissions. LÄS MER