Sökning: "flexural strength"

Visar resultat 6 - 10 av 60 uppsatser innehållade orden flexural strength.

1. 6. Analysis of Resin Impregnated Non-woven : In collaboration with Hitachi Energy

   Kandidat-uppsats, Uppsala universitet/Institutionen för materialvetenskap

   Författare :Ahmed Abdulkareem Najm Al-Saedi; Anders Hedenfeldt; Andrea García; Anna-Karin Kron; Cornelia Bergström; Lova Källkvist; [2022]
   Nyckelord :resin impregnated non-woven; bushings; composite; resin impregnated paper; tensile; bending; permeability; mechanical properties;

   Sammanfattning : High voltage bushings are the most critical components of power transformers. A common material used in bushings is resin impregnated paper (RIP). Hitachi Energy is investigating whether this can be replaced with a new material, resin impregnated non-woven (RIN). LÄS MER

3. 7. Shear Failure of Steel Fiber and Bar Reinforced Concrete Beams Without Stirrups : Predictions based on Nonlinear Finite Element Analyses

   Master-uppsats, KTH/Betongbyggnad

   Författare :David Andersson; [2022]
   Nyckelord :Nonlinear finite element analysis; Shear failure; Fiber reinforced concrete beams; ATENA;

   Sammanfattning : Shear failure in concrete beams are often brittle in nature and potentially dangerous without adequatereinforcing measures. In design of concrete, it is commonly recommended to install transversalreinforcement along the shear span to induce a more ductile structural response, improving the shearcapacity all together and providing sufficient warning prior to collapse. LÄS MER

4. 8. Brotthhållfastheten på monolitiska broar av flerskiktad zirkonia med olika konnektordimensioner och placering i en disk - En pilotstudie

   Kandidat-uppsats, Malmö universitet/Odontologiska fakulteten (OD)

   Författare :Iman Echreshavi; Linda Alsabti; [2022]
   Nyckelord :Connector dimension; Monolithic zirconia; Multi-layered zirconia; Yttria-stabilized zirconium dioxide; Y-TZP.;

   Sammanfattning : Purpose: The purpose of this study was to evaluate the fracture strength of monolithic FDPs of multi-layered zirconia (YML) with different connector dimensions and placement in the disc. Material and method: Forty 3-unit monolithic anterior FDPs were produced, 212223, and divided in four groups (n=10) based on the different connector dimensions and strategies for placement in KATANATM Zirconia Yttria Multi-Layered (YML)-disc. LÄS MER

5. 9. Characterization methodology to assess the mechanical properties of delignified birch/PMMA transparent wood biocomposites

   Master-uppsats, KTH/Fiber- och polymerteknologi

   Författare :Nicolò Arcieri; [2022]
   Nyckelord :Transparent wood; mechanical properties; fracture toughness; in situ experiments; cohesive zone model; Transparent trä; mekaniska egenskaper; brottsstyrka; in situ-experiment; modell för kohesionszonen;

   Sammanfattning : Transparent trä biokompositer (TW) är en ny attraktiv klass av biokomposit. De är uppbyggda av delignifierat trä som impregnerats med en polymer med matchande brytningsindexet.  TW kan skräddarsys för inom ett brett spektrum av funktionella, optiska och mekaniska egenskaper. LÄS MER

7. 10. Moment-resisting connections for glulam using birch plywood : An experimental study on both mechanical and adhesive connections

   Master-uppsats, KTH/Byggnadsmaterial

   Författare :Jonatan Ringaby; [2022]
   Nyckelord :;

   Sammanfattning : The aim of this study was to investigate the load-bearing capacity and stiffness of mechanical and adhesively bonded connections in timber structures with gusset plates made of birch plywood, as a preliminary study for potential future use in long-span timber structures which could reduce the environmental impact of the building sector by substituting steel with wood products in moment-resisting connections. Birch plywood was chosen for this study due to its high bending strength in comparison to plywood made of softwoods and its availability on the market. LÄS MER