Sökning: "Cable Loading"
Visar resultat 1 - 5 av 12 uppsatser innehållade orden Cable Loading.
1. Photovoltaic hosting capacity study for a residential area in Uppsala using a synthetic low voltage network
Master-uppsats, Högskolan Dalarna/Institutionen för information och teknikSammanfattning : With the growing acceptance of photovoltaic (PV) systems globally including Sweden, an increasing number of PV systems has continually been installed all through Sweden. In this study, a selected residential area in Uppsala Sweden is considered as a possible site for PV system installation. LÄS MER
2. Wind Farm Modeling in DIgSILENT PowerFactory® and Load Flow Analysis of Internal Collector Network
Master-uppsats, Uppsala universitet/Institutionen för geovetenskaperSammanfattning : The purpose of this study is to model an operational wind farm in DIgSILENT PowerFactory® using manufactures specifications and investigate the active power energy losses. The model is tested with the operational recorded data from the wind farm and is validated. LÄS MER
3. Lärdomar från raset av Tarfalahallen - En experimentell studie av spikförbandets inverkan på stabiliteten ur plan
Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/Avdelningen för Konstruktionsteknik; Lunds universitet/Institutionen för bygg- och miljöteknologiSammanfattning : I mars 2020 rasade Tarfalahallen i Kiruna. Idrottshallens takkonstruktion bestod av långa underspända limträbalkar upplagda på limträpelare. Balkarna var underspända med hjälp av två trycksträvor som stöttades med dragband av stål och anslutningen mellan trycksträvorna och balken bestod av spikförband. LÄS MER
4. Utformning och installation av internetuppkopplad datalogger för kontinuerlig sintringsugn : Utveckling och implementation av Raspberry Pi baserad internetupkopplad datalogger, samt framtagning av lösningsförslag för viktmätning
Kandidat-uppsats, Linköpings universitet/MaskinkonstruktionSammanfattning : Höganäs AB has a customer center where they perform their cutomers production processes usingtheir own metal powder, thereby gaining knowledge of how the powder behaves and how it can be improved. The powder is usually pressed, and then sintered in a sintering furnace where temperature and atmosphere composition gives the component its desired characteristics. LÄS MER
5. Modelling and Mechanical Analysis of Continuously Transposed Conductor
Master-uppsats, KTH/HållfasthetsläraSammanfattning : As the CTC (transposed continuously conductor) is widely accepted as the cable used in transformers, mechanical analysis of CTC under different load cases is in need. This paper introduces a new method of creating detailed CTC models automatically in Comsol Multiphysics and the models are applied for conducting FEA (Finite Element Analysis) for different load cases of practical importance. LÄS MER