Avancerad sökning

Visar resultat 1 - 5 av 31 uppsatser som matchar ovanstående sökkriterier.

  1. 1. The effect of recycling and processing routes on recrystallization in a secondary 3xxx aluminium alloy

    Master-uppsats, Jönköping University/JTH, Material och tillverkning

    Författare :Anton Rolseth; [2023]
    Nyckelord :Aluminium alloys; sheet metal forming; grain boundary segregation; recrystallization; Zener pinning; casting; rolling;

    Sammanfattning : Aluminium alloys have the possibility to be infinitely recycled. By only generating 5% of the emissions compared to primary aluminium, great CO2 savings can be made. One of the issues in manufacturing components entirely from post-consumer scrap is the presence of trace elements and impurities. Such elements can be Fe, Cu, Cr, P and Pb. LÄS MER

  3. 2. Evaluation of in-situ technology performance and decision analysis by combining economic and environmental impact analysis for a case study

    Master-uppsats, Lunds universitet/Avdelningen för Energi och byggnadsdesign; Lunds universitet/Institutionen för arkitektur och byggd miljö

    Författare :Elham Tamadonyazdian; [2023]
    Nyckelord :Stabilization; Dredging; Solidification; Cement mixtures; Binders; In-situ technology; Environmental impact categories; Life cycle assessment LCA ; Economic analysis; Life cycle costing LCC ; Global Warming Potential GWP ; Acidification Potential AP ; Eutrophication Potential EP ; Ozone Layer Depletion Potential ODP ; Single-Point Rate SPR .; Technology and Engineering;

    Sammanfattning : In the contemporary global context, the global focus on reducing environmental impacts in any formats has intensified. This study intends to assess the environmental impacts and life cycle costs associated with the A1-A5 stages (production and construction stages) of the Köping Port project and eight additional proposed scenarios. LÄS MER

  4. 3. Modelling Gas Flow Behaviour in Gas Atomizer

    Master-uppsats, KTH/Materialvetenskap

    Författare :Aravind Senan Vasanthasenan Reji; [2022]
    Nyckelord :Gas atomization; Nozzle; Velocity; Static pressure; Discrete phase model; Gasatomisering; Munstycke; Hastighet; Statiskt tryck; Diskret fasmodell;

    Sammanfattning : Gas atomization is regarded as a reliable method for creating high-quality metal powders from molten metal. The liquid metal is fed into the chamber as a free-falling stream through a nozzle, where it is impinged by high-velocity gas jets, causing degeneration and production of metal droplets, which solidify to create metal powders. LÄS MER

  5. 4. Dissolution of Cored Wire in Steel Melt : Optimization of Feeding Rate

    Master-uppsats, KTH/Materialvetenskap

    Författare :Hagen Christian Hagens; [2022]
    Nyckelord :Cored wire injection · light alloy addition · feed rate optimization · inclusions modification · finite difference method;

    Sammanfattning : Calcium treatment is an established operation in the production of steels. Most importantly, it serves to modify detrimental inclusions in the melt for improved castability and superior product properties. Due to calcium’s low melting point and high vapour pressure, its addition to liquid steel is challenging and yields are generally low. LÄS MER

  7. 5. Supercooling Simulation of Latent Heat Based Storage : A simulation model built in COMSOL Multiphysics

    Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)

    Författare :OLLE CEDELL; [2022]
    Nyckelord :;

    Sammanfattning : The energy demand in the building sector makes up a large portion of our energy consumption. The industrial sector is also energy intense and oftentimes loses a great deal as surplus heat. LÄS MER