Sökning: "residual thermal stresses"
Visar resultat 6 - 10 av 20 uppsatser innehållade orden residual thermal stresses.
6. Development of a Method to Measure Residual Stresses in Cast Components with Complex Geometries
Master-uppsats, KTH/MaterialvetenskapSammanfattning : Cast iron, taking the advantages of the advanced castability forming components of complex geometries and favorable mechanical properties, is employed in engine components in truck industries. Compacted graphite iron (CGI) integrates both merits of lamellar graphite iron (LGI) and spheroidal graphite iron (SGI) such as good machinability and high thermal conductivity from LGI, high ultimate tensile strength (UTS), good fatigue resistance, high elastic modulus, and high ductility from SGI, thus is now becoming a competitive alternative of traditional LGI in cylinder blocks and heads. LÄS MER
7. Modeling and Analysis of the Shot Peening Process : a Study of the Residual Stresses in an Insert using the Finite Element Method
Magister-uppsats, Linnéuniversitetet/Institutionen för maskinteknik (MT)Sammanfattning : Cutting tool inserts are often coated with thin layers either through chemical vapor deposition (CVD) or physical vapor deposition (PVD) processes. In order to have a better wear resistance cutting tools are mostly subjected to post-coating treatment processes. LÄS MER
8. Polyimide thin-ply composite
Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : Mechanical performance of composite structures is influenced by the accumulation of damage from the manufacturing process and throughout the whole service life. For instance, an aircraft is subjected to a combination of mechanical loading and the thermo-oxidative environment from the take-off to the landing. LÄS MER
9. Influence of Nitrocarburization on Thermo-Mechanical Fatigue Properties : Material Characterization of Ductile Cast Iron for Exhaust Components
Master-uppsats, Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)Sammanfattning : The large number of vehicles operating on the roads cause high emissions and consequently a negative effect on the environment. When developing and optimizing internal combustion engines, certain requirements must be considered, which are environmental regulations, reduced fuel consumption and increased specific power. LÄS MER
10. Evaluation of residual stresses and distorsions in additively manufactured components
Master-uppsats, KTH/Hållfasthetslära (Avd.)Sammanfattning : Additive manufacturing is a novel manufacturing technique, which has developed rapidly in recent years. The additive manufacturing process produces complex geometries, light weighted components and reduces the material waste. During the building process, a laser energy source is commonly used to melt the metal powder. LÄS MER