Integrating CO2 Utilisation and Biomass Gasification with Steel-making Electric Arc Furnaces (EAF)

Sammanfattning: Without a doubt, there is a consensus around the international community which suggests that our current way of life is unsustainable for a healthy planet, society and economy. One focal point that should be taken deeply into consideration is the steel industry as, globally, it accounts for 8% of global emissions. Thus, there is a dire need to incorporate drastic measures, if one wishes to reach net-zero emissions by 2050, in accordance with the Paris Agreement of 2015. Electric Arc Furnaces are seeing a rapid implementation in the steel industry. However, at 0.5 tonnes of CO2 emitted per tonne of liquid steel produced, this emissions rating is still significant considering the amount of steel being produced annually. Additionally, these furnaces emit off-gases which must be treated from the dust. This leaves operators with a conundrum as the dust content compromises the use of waste heat recovery boilers for energy recovery, due to constant breakdowns. Therefore, this study aims to analyse the feasibility of using bioenergy and carbon capture and utilisation (CCU) concepts to capitalise on the high off-gas energy and emissions content to remedy the dust issue, whilst producing higher value products. The proposed concept evaluates the effectiveness of using the off-gas as the energy carrier and feed-stock for a biogasificaiton unit. Three different cases based on different EAF off-gas compositions have been investigated. Case 1 suggested that the off-gas composition is very CO2-heavy, whichled to investigating the option of adopting a CO2 biogasification concept to directly use the CO2. Case 1 performed the best in terms of CO2 utilisation efficiency; being 0.293. The system energy utilisation also noted that 49.3% of the inlet streams energy was transferred to the desired product. On a broader picture, this means that around 11% of the total energy coming out of the EAF would be utilised in producing a value-added product in the form of syngas. This contrasts with allowing around 33% of the energy in the EAF either being completely dissipated to the environment or converting it into electricity via waste heat recovery. The following two cases, Case 2 and 3, indicate EAF off-gas composition containing 72% and 40% nitrogen respectively. For Cases 2 and 3, a steam biogasification process was integrated which did not yield positive results for CO2 utilisation, since is a more promising gasifying agent. In addition, significant energy from EAF off-gas is used in raising the temperature of steam to the design temperature of the gasifier. However, although the CO2 was not directly used in this part of the process, it allows for other opportunities of process integration, for example the reverse water-gas shift step.