Sökning: "Johnson-Cook"
Visar resultat 1 - 5 av 8 uppsatser innehållade ordet Johnson-Cook.
1. Characterization of commercially pure titanium under supercritical conditions : By means of hybrid numerical-experimental approach
Master-uppsats, KTH/MaterialvetenskapSammanfattning : Material characterization was addressed by solving the inverse engineering problem to mechanical properties by means of finite element analysis and computational optimization. High-temperature and high strain-rate data from split Hopkinson pressure bar tests on commercially pure titanium were used in the study. LÄS MER
2. Development of Methodology for Finite Element Simulation of Overhead Guard Impact Test
Master-uppsats, Linköpings universitet/Mekanik och hållfasthetsläraSammanfattning : Forklifts that are capable of lifting heavy loads and reaching high lift heights are required by stan-dards to have an overhead guard to protect the operator from falling objects. The same standardsspecify a standardized procedure for testing the strength of these overhead guards. LÄS MER
3. Material characterization of 316L
Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/HållfasthetsläraSammanfattning : At Tetra Pak, general knowledge of food and beverage processing is of great importance. This in turn, depends on the equipment used for the particular process. One of these equipment consists of deformed tubes made of stainless steel 316L. The aim of the present work is to get an understanding of the material 316L. LÄS MER
4. Burst test analysis of metal sandwich wall panels
Master-uppsats, KTH/LättkonstruktionerSammanfattning : In this report, an investigation of some of the most common damage models available in literature is performed. Their ability to predict ductile failure of metals will be compared and a specific focus is put on burst failure prediction of the cooling channels inside a sandwich wall structure. LÄS MER
5. Experimental investigation of the strain rate dependence of SS2506 gear steel
Master-uppsats, KTH/MaterialvetenskapSammanfattning : hot peening is a surface treatment used to increase the fatigue strength of metallic components, for example gears, and it is of great interest to be able to model and simulate the effect of this treatment in order to save time and money. An important parameter that has to be considered when modeling the peening situation is the strain rate dependence of the target material. LÄS MER