Sökning: "lastkombinationer"

Visar resultat 6 - 10 av 18 uppsatser innehållade ordet lastkombinationer.

  1. 6. Glasfasader för trämoduler. Glass facade for a modular wood construction.

    Master-uppsats, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurser

    Författare :Linnea Cederwall; [2018]
    Nyckelord :;

    Sammanfattning : Abstract Modular construction has significantly developed in the past few decades. The method is preferred due to the quick assembly times and ease of installation. In Sweden, wood is preferred as structural material for the modules. However, modular construction can be aesthetic due to its repetitive façade. LÄS MER

  3. 7. Global Analysis and design of a complex slanted High-Rise Building with Tube Mega Frame

    Master-uppsats, KTH/Betongbyggnad

    Författare :Hamzah Al-Nassrawi; Grigorios Tsamis; [2017]
    Nyckelord :Tubed Mega Frame; Tall Buildings; Inclined structures; Structural Analysis; ETABs.; Tubed Mega Frame; Höga byggnader; Lutande strukturer; Strukturell analys; ETABS;

    Sammanfattning : The need for tall buildings will increase in the future and new building techniques will emerge to full fill that need. Tyrénshas developed a new structural system called Tube Mega Frame where the major loads are transferred to the ground through big columns located in the perimeter of the building. LÄS MER

  4. 8. Design of slender steel members : A comparison between the reduced stress method and the effective width method

    Master-uppsats, KTH/Bro- och stålbyggnad

    Författare :Oskar Skoglund; Daniel Samvin; [2016]
    Nyckelord :Steel structures; finite element method; reduced stress method; effective width method; nonlinear finite element method; Stålkonstruktion; finita element metoden; reducerad spänningsmetoden; effektiva bredd metoden; olinjär finita element analys;

    Sammanfattning : As of now, the most common way in Sweden, to address the issue of local buckling of steelstructures is through the procedure called the effective width method. A less commonprocedure for dealing with local buckling is the reduced stress method. LÄS MER

  5. 9. Evaluation of Failure Modes for Concrete Dams

    Master-uppsats, KTH/Betongbyggnad

    Författare :Lisa Broberg; Malin Thorwid; [2015]
    Nyckelord :Gravity dams; concrete; design criteria; RIDAS; Eurocode; limit turning; Gravitationsdammar; betong; brottkriterium; RIDAS; Eurokod; limit turning;

    Sammanfattning : The safety of a concrete dam is ensured by designing according to failure criteria, for all combinations of loads using safety factors. Today in Sweden, RIDAS, the Swedish power companies’ guidelines for dam safety, is used for the design of dams and is based on BKR, the National Board of Housing, Building and Planning. LÄS MER

  7. 10. Stress simulation of the SEAM CubeSat structure during launch.

    Magister-uppsats, KTH/Hållfasthetslära (Inst.)

    Författare :Julie Fagerudd; [2015]
    Nyckelord :;

    Sammanfattning : A spacecraft is subjected to dynamic and static loads during launch. These loads are deterministic and of random nature and cannot be tested under the real conditions due to cost considerations. LÄS MER