Sökning: "power meter"
Visar resultat 1 - 5 av 219 uppsatser innehållade orden power meter.
1. Design and Construction of an Autonomous Sentry Turret Utilising Computer Vision
Kandidat-uppsats, KTH/Skolan för industriell teknik och management (ITM)Sammanfattning : The design and manufacture of a sentry gun turret capable of accurately and rapidly tracking and shooting moving targets was a challenging task that required delving into various engineering disciplines. This bachelor's thesis explores this challenge by presenting the process of construction, as well as the performance results of a turret created using a combination of 3D printing, laser cutting, and metal workshop manufacturing. LÄS MER
2. The climate impact of fishways : A life cycle assessment of Blyberg’s and Spjutmo’s up- and downstream fishways
Master-uppsats, Linköpings universitet/Industriell miljöteknikSammanfattning : The Swedish national plan for reapproval of hydropower describes that hydropower plants (HPPs) are required to be reassessed to ensure that modern environmental conditions are set for the permits. Since dams and HPPs create barriers for migrating fish and consequently disfavor biological diversity, one consequence of the national plan is that fishways are being constructed. LÄS MER
3. P-cores and E-cores in virtual machines
Uppsats för yrkesexamina på grundnivå, Mälardalens universitet/Akademin för innovation, design och teknikSammanfattning : In 2021, Intel released a new generation of consumer processors that had two different types of cores; they called them the efficiency-cores and the performance-cores, or for short, the E-cores and the P-cores. The release of these processors sparked interest in the potential impact if they were introduced into the enterprise market. LÄS MER
4. Dimensioning study of EPR2 fuel pool cooling system
Master-uppsats, KTH/FysikSammanfattning : The PTR system allows the EPR2 fuel pool to be cooled. The evacuation of the residual power fromthe pool is ensured by several heat exchangers and pumps, which have to be dimensioned in order to meetdifferent requirements.In order to dimension them, the worst-case scenario of the components must first be determined. LÄS MER
5. Developing an Ar milling process to improve the contact quality to InAs nanowires
Kandidat-uppsats, Lunds universitet/Fysiska institutionen; Lunds universitet/Fasta tillståndets fysikSammanfattning : The aim of this work was to develop a stable and reproducible argon milling process for InAs nanowires to remove the native oxide layer that increases electrical resistance. This was done by identifying a few milling parameters and studying them in relation to the milling rate of silicon dioxide (SiO2). LÄS MER