Sökning: "strip steels"
Hittade 5 uppsatser innehållade orden strip steels.
1. Tribological characterisation of additively manufactured hot forming steels
Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : Over the last decade, the application of ultra-high strength steel as safety components and structural reinforcements in automobile applications has increased due to their favourable high-strength-to-weight ratio. The complex shaped components are widely produced using hot stamping. LÄS MER
2. Material Transfer Mechanisms during Interaction of Aluminium Alloy and Tool Steel at Elevated Temperatures
Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : Hot stamping of aluminium alloys allows for increased formability, decreased springback and the possibility of integrating age-hardening heat treatments into the process. However, it can be challenging due to the occurrence of material transfer of aluminium onto the tool, as aluminium is prone to adhesion even at low temperatures. LÄS MER
3. Optimization of annealing parameters for SANDVIK 13C26 and 20C strip steels : By MODDE analysis and modified JMAK method
Master-uppsats, KTH/MaterialvetenskapSammanfattning : The process optimization of continuous annealing furnace, RHF 125, for recrystallization annealing of two steel grades, Sandvik 13C26 and Sandvik 20C has been carried out. To recreate the continuous annealing process carried out in the roller hearth furnace in the industry, samples with different cold reduction rates were chosen from ongoing production lines. LÄS MER
4. Optimering av slipningsprocess på belagt bandstål : Analys av parametrars påverkan på restspänningar
M1-uppsats,Sammanfattning : This report is a degree project for a Bachelor of Science degree with specialization in mechanical engineering MSGC17 at Karlstad University. It’s made by a graduate engineering student specializing in mechanical engineering MSGC17 at Karlstad University. The work was carried out at voestalpine Precision Strip AB in Munkfors. LÄS MER
5. Processens påverkan på rakhet hos bandstål : Från inkommande råmaterial till färdigt halvfabrikat
M1-uppsats, Luleå tekniska universitet/Mineralteknik och metallurgiSammanfattning : Examensarbetet har utförts under våren 2017 vid Bergsskolan i Filipstad, i samarbete med voestalpine Precision Strip i Munkfors. Att producera så kostnadseffektivt som möjligt likväl att minimera material som kasseras är något företag idag ser som självklart. På samma gång som detta efterlevs bör även kundnöjdheten maximeras. LÄS MER