Approach for frequency response-calibration for microphone arrays

Sammanfattning: Matched frequency responses are a fundamental starting point for a variety ofimplementations for microphone arrays. In this report, two methods for frequencyresponse-calibration of a pre-assembled microphone array are presented andevaluated. This is done by extracting the deviation in frequency responses of themicrophones in relation to a selected reference microphone, using a swept sine asa stimulus signal and an inverse filter. The swept sine includes all frequencieswithin the bandwidth of human speech. This allows for a full frequency responsemeasurements from all microphones using a single recording.Using the swept sine, the deviation in frequency response between the microphonescan be obtained. This deviation represents the scaling factor that all microphonesmust be calibrated with to match the reference microphone. Applying the scalingfactors on the recorded stimulus signal shows an improvement for both implementedmethods, and where one method matches the frequency response of the microphoneswith high accuracy.Once the scaling factors of the various microphones is obtained, it can be usedto calibrate other recorded signals. This leads to an minor improvement formatching the frequency responses, as it has been shown that the differencesin frequency response between the microphones is signal-dependent and variesbetween recordings. The response differences between the microphones dependson the design of the array, speaker, room and the acoustic frequency dispersionthat occurs with sound waves. This makes it difficult to calibrate the frequencyresponses of the microphones without appropriate equipment because the responseof the microphones is noticeably affected by these other factors. Proposals to addressthese problems are discussed in the report as future work.