Sökning: "Fabrication"

Visar resultat 6 - 10 av 367 uppsatser innehållade ordet Fabrication.

  1. 6. Comparison of Modified Double Tray Method and 3D scanning i prosthodontics

    Master-uppsats, Umeå universitet/Institutionen för odontologi

    Författare :Elsa Nermo; Eloïse Rousseau; [2023]
    Nyckelord :3D scanning; modified double tray method.;

    Sammanfattning : The purpose of this in vitro study was to investigate and to compare the precision of two different impression techniques for oral prosthetic construction, namely the analogue modified double tray method, and the digital three-dimensional scanning with Trios 3D shape intraoral scanner. The analog method used was a modified double tray method where the tray had been removed to diminish vertical discrepancies in occlusion. LÄS MER

  3. 7. Antenna Arrays for Dual-Frequency Harmonic Radar Application

    Master-uppsats, Lunds universitet/Institutionen för elektro- och informationsteknik

    Författare :Venkatesh Raja; Mohammad Zafar Mohammad; [2023]
    Nyckelord :Technology and Engineering;

    Sammanfattning : The aim of this thesis is to design two patch antenna arrays for dual-frequency harmonic radar application, one for the transmitter and the other for the receiver. The arrays are used to track the Bogong moth that migrates from the countryside to the Australian Alps during spring. LÄS MER

  4. 8. Real- and Quasi-Atomic Layer Etching for Ultra-High Resolution Patterning

    Master-uppsats, Lunds universitet/Fasta tillståndets fysik; Lunds universitet/Fysiska institutionen

    Författare :Yoana Ilarionova; [2023]
    Nyckelord :Physics and Astronomy;

    Sammanfattning : An attempt was made at developing atomic layer etching from a cyclic etching process in an ICP-RIE tool. During the process OES was used for contamination monitoring and estimation of the relative amount of Cl2 left in the chamber during the etch step of cyclic etching processes. LÄS MER

  5. 9. Coordinate Mark Out Using Intersecting Line Lasers

    Kandidat-uppsats, KTH/Skolan för industriell teknik och management (ITM)

    Författare :Jonas Carlsson; Jeremy Gallant; [2023]
    Nyckelord :Mark out; Laser; Mechatronics; Floor Layout; Three object triangulation; Utsättning; Laser; Mekatronik; Golvutsättning; Trippelobjektstriangulering;

    Sammanfattning : In the entertainment industry, where temporary structures are erected in a new venue every day, floor markings play an important role during the set up. Today, mark out is commonly done using tape measures - a very tedious and time consuming process. LÄS MER

  7. 10. Materialverifieringsprocess för 3D-printad onyx med jämförelse mellan teoretiskt och empiriskt provresultat

    Master-uppsats, Mälardalens universitet/Akademin för innovation, design och teknik

    Författare :Mattias Feltendal; Erik Niklasson; [2023]
    Nyckelord :Additiv tillverkning; Friformsframställlning; materialverifiering; materialtestning; dragprov; produktutveckling;

    Sammanfattning : In today's rapidly evolving industrial landscape, characterized by intense global marketcompetition, companies must adapt to the latest and most efficient practices to facilitatecontinuous improvement and maintain their competitiveness. Additive Manufacturing (AM) has garnered significant attention in recent years. LÄS MER