Sökning: "Serial interface"

Visar resultat 16 - 20 av 64 uppsatser innehållade orden Serial interface.

  1. 16. Implementering av ISOBUS på ECU vid Ålö AB

    Uppsats för yrkesexamina på grundnivå, Umeå universitet/Institutionen för tillämpad fysik och elektronik

    Författare :Pauline Eklund; [2017]
    Nyckelord :;

    Sammanfattning : A serial bus called ISOBUS based on CAN is becoming more and more common in the agriculture and forestry industry. The bus specifies communication between tractors and their implements. Earlier each implement had its own monitor to show its functionalities, which could lead to a lot of monitors in the tractor cabin. LÄS MER

  3. 17. Serial Video Links in Automotive Applications

    Master-uppsats, Linköpings universitet/Fysik och elektroteknik; Linköpings universitet/Tekniska högskolan

    Författare :Oskar von Heideken; Max Wennerfeldt; [2017]
    Nyckelord :serdes; automotive; ADAS; LVDS;

    Sammanfattning : This thesis investigates the available and upcoming serializer and deserializer solutions for MIPI-CSI 2 camera interface, in order to reduce cable cost and lower installation complexity for mounting satellite cameras in automotive applications. A market survey was conducted resulting in several available and coming solutions. LÄS MER

  4. 18. Development of a sensory feedback system in hand prostheses.

    Master-uppsats, Lunds universitet/Avdelningen för Biomedicinsk teknik

    Författare :Alexander Jordansson; Nima Haji Sheykhi; [2017]
    Nyckelord :Prosthetic hands; sensory feedback; Myoelectric control; Arduino; Ottobock; limb prostheses; Robots; PWM; Data transfer; Build circuit; RTC; Data logger; EMG; Bluetooth; I2C; FSR; Sleep mode; Interrupt; Baud rate; serial monitor; Serial interface; memory; EAGLE; LabVIEW; Master; Slave; Low pass filter; Power consumption; Transfer time; Calibration; Technology and Engineering;

    Sammanfattning : This master thesis is about improvement, optimization and further development of the sensory feedback in a prosthetic hand previously investigated at the department of Biomedical Engineering in Lund. The first approach will be to investigate and further see into the need of a sensory feedback in hand prostheses. LÄS MER

  5. 19. Virtual Cycle-accurate Hardware and Software Co-simulation Platform for Cellular IoT

    Master-uppsats, Lunds universitet/Institutionen för elektro- och informationsteknik

    Författare :Marcel Tovar Rascon; Patrik Elfborg; [2017]
    Nyckelord :co-simulation; cycle-accurate; ESL; HLS; SystemC; SoC Designer; IoT; SoC; FPGA; embedded; Technology and Engineering;

    Sammanfattning : Modern embedded development flows often depend on FPGA board usage for pre-ASIC system verification. The purpose of this project is to instead explore the usage of Electronic System Level (ESL) hardware-software co-simulation through the usage of ARM SoC Designer tool to create a virtual prototype of a cellular IoT modem and thereafter compare the benefits of including such a methodology into the early development cycle. LÄS MER

  7. 20. Design and Development of Data Acquisition/Processing and Communication Interface for Radar Front-End

    Master-uppsats, Linköpings universitet/Fysik och elektroteknik; Linköpings universitet/Tekniska högskolan

    Författare :Daniel Käll; Emelie Lannerhjelm; [2016]
    Nyckelord :data acquisition; frequency modulated continuous wave; back end;

    Sammanfattning : This thesis follows the design process of a back end. The purpose of this back end is to interface a radar front end, developed by Acreo Swedish ICT, and stream it’s digitalized output to a PC using Universal Serial Bus (USB) 3.0. LÄS MER