Sökning: "optimum pressure"
Visar resultat 36 - 40 av 44 uppsatser innehållade orden optimum pressure.
36. Studie av verkningsgrad potentialen för ett vatten baserat Waste Heat Recovery system med kolvexpander
Master-uppsats, KTH/Maskinkonstruktion (Inst.)Sammanfattning : SammanfattningEn ånganna monterades i EGR (Exhaust Gas Recirculation) slingan på en 12,7 liters Scania Euro V motor (DC1306). En modell som beskriver Rankine cykel togs fram med vatten som köldmedium i simuleringsverktyget GT-Power. Ångpannan i GT-power modellen kalibrerades m.h. LÄS MER
37. Assessment of humidity management effects on PEM fuel cell performance
Master-uppsats, KTH/EnergiteknikSammanfattning : The electrical energy output and the performance of a PEM fuel cell is dependent on the ion transfer in the fuel cell. The ion transport mechanism in the electrolyte cell membrane is dependent on the charge site in the membrane. LÄS MER
38. Simulation of a lab-scale methanation reactor
Master-uppsats, KTH/KemiteknikSammanfattning : By the everyday increasing enthusiasm for using renewable-sustainable sources in energy production area, focusing on one and optimizing it in the best possible way should be of much interest. Biogas production from anaerobic digestion of wastes is a well known energy source which could be applied more efficiently if the CO2portion of it would be upgraded to CH4as well. LÄS MER
39. Transportation of separate waste fractions in an underground waste transportation system
Master-uppsats, KTH/Industriell ekologiSammanfattning : Today waste management has entered a new stage. Since wastes still contain natural materials and energy that can be extracted, it should be treated in effective ways, for example, for energy recovery or material recycling. LÄS MER
40. Radialtätning till Retarder
Master-uppsats, Fluid och mekanisk systemteknikSammanfattning : This thesis has the overall objective to develop the optimum sealing system between the retarder and transmission. Today, there is a pressure-relief and two radial seals separation between the retarder and transmission. LÄS MER