Sökning: "residual stress analysis"
Visar resultat 1 - 5 av 33 uppsatser innehållade orden residual stress analysis.
1. Visualization, modeling and consequences of residual stresses in glass frit sealing of a UV light source
Uppsats för yrkesexamina på avancerad nivå, Uppsala universitet/MikrosystemteknikSammanfattning : PureFize Technologies AB develops and manufactures a broadband ultraviolet (UVC) light technology device that is mercury-free and based on nanotechnology, using the principle of field emission. The light source is made of Ti and glass, which are hermetically bonded, using a low-temperature glass frit, at elevated temperatures. LÄS MER
2. Numerical analysis of a bearing strength in delaminated composite joint
Master-uppsats, KTH/Lättkonstruktioner, marina system, flyg- och rymdteknik, rörelsemekanikSammanfattning : Composite structures are commonly joined using adhesive or mechanical joints, withmechanical joints being preferred when components need to be removable for maintenancepurposes. However, the presence of mechanical joints introduces a discontinuity in theload path, which can serve as an initiation point for failure and needs to be taken intoaccount in the design of the joint. LÄS MER
3. Effect of post-treatment of cemented carbide : Microstructural investigation and evaluation of mechanical properties of cemented carbide inserts for rock tool applications
Master-uppsats, Karlstads universitet/Avdelningen för maskin- och materialteknikSammanfattning : Cemented carbides are used in rock tool applications by reason of their beneficial mechanical properties, i.e. a combination of high toughness, wear resistance and hardness. The cemented carbides commonly receive their hardness from tungsten carbides (WC) whereas cobalt (Co) is the dominating binder material. LÄS MER
4. Development of a method for estimation of contact fatigue life in hypoid gears
Master-uppsats, KTH/Maskinkonstruktion (Inst.)Sammanfattning : Hypoid gears have been used extensively in automobiles, aerospace, marine and other applications for decades. The special advantages of hypoid gears come with inherent contact complexities of varying curvature and sliding in both profile and lengthwise direction. LÄS MER
5. Effect of Induction-Heat Post-Curing on Residual Stresses in Fast-Curing Carbon Fibre Reinforced Composites
Master-uppsats, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : Manufacturing induced shape distortions is a common problem for composite materials. Due to the non-isotropic nature of carbon fibre reinforced polymers (CFRP) unavoidable deformations occur during part production. During fabrication of polymer composites, the material obtains its final shape at elevated temperatures. LÄS MER