Evaluation of load distribution on ballasted reinforced concrete railway trough bridges

Sammanfattning: A significant portion of the reinforced concrete railway bridges in Sweden are reaching their designed lifespan and are scheduled to be demolished and replaced in the upcoming years. To limit the econom-icand environmental impact related to the replacement of existing railway infrastructure, a comprehen-siveevaluation of their capacity is required with the aim of extending its lifespan. In fact, experimental evidence has shown that some of these bridges may have a higher capacity than previously determined due to the conservative assumptions used during their design. The proper stress distribution pattern at the ballast-concrete interface is among the factors that need to be studied, as research on the topic has shown that some of the available guidelines to calculate it can produce conservative results. In this paper, available analytical models for computing the internal forces in concrete bridges due to train axle loads are compared to a numerical model calibrated using the experimental results obtained from the test of ballasted reinforced concrete trough bridge, a typical structural type found in Sweden, and existing research. As a first step, a literature review of existing numerical modeling strategies for ballast-edconcrete railway structures (e.g., finite element models, discrete element models, and their combina-tion)is conducted. Then, the most appropriate numerical modelling strategy is identified and used to develop the numerical model of the bridge, including the ballast. Finally, results of contact pressure and vertical stresses in the numerical model are compared to those obtained analytically.