Sökning: "Blade tip clearance"

Visar resultat 1 - 5 av 7 uppsatser innehållade orden Blade tip clearance.

  1. 1. Forced response numerical investigation of a transonic compressor rotor

    Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)

    Författare :Mariana Pires Gonçalves Toco Dias; [2023]
    Nyckelord :Compressor; rotor; blisk; aeroelasticity; aerodynamic damping; CFD; transient; forced response;

    Sammanfattning : The present thesis discusses the forced response of a rotor’s bladed-disk when excited by the periodic force produced by a wake generator, or Inlet Guide Vane (IGV),with 8 equally-spaced blades. These components are part of an axial transonic compressor rig, moreover the Transonic Compressor Darmstadt 1 (TCD1), located at the Technical University of Darmstadt. LÄS MER

  3. 2. Process monitoring of turbine blades : Monitoring of blade tip clearance using eddy current sensors

    Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)

    Författare :Hampus Andersson; [2022]
    Nyckelord :Blade tip clearance; Blade tip timing; Eddy current sensor; Turbine monitoring; Maintenance.; Bladtoppspel; Bladvibrationer; Eddy current sensorer; Turbinövervakning; Underhåll.;

    Sammanfattning : This thesis has been a collaboration between the Royal Institute of Technology (KTH) and Siemens Energy which invest in the research facility at KTH. The objective was to investigate the use of eddy current sensors in real-time monitoring of turbine blades. LÄS MER

  4. 3. Study of tip clearance flows

    Master-uppsats, KTH/Flygdynamik

    Författare :Camille Fournis; [2018]
    Nyckelord :turbomachine; compressor; tip leakage flow; vortex; turbomaskin; kompressor; gapflöde; virvel;

    Sammanfattning : The tip leakage vortex is responsible for the generation of stagnation pressure losses inside the compressor along with the outbreak of rotating stall and surge. The current paper analytically proved that a part of the losses is proportional to the vortex circulation squared. LÄS MER

  5. 4. Analytical prediction of turbocharger compressor performance: A comparison of loss models with numerical data

    Master-uppsats, KTH/Maskinkonstruktion (Inst.)

    Författare :Sergio Sanz Solaesa; [2016]
    Nyckelord :;

    Sammanfattning : One-dimensional models predict the performance of centrifugal compressor in short time, being a helpful design tool in the early design stages. They assume uniform flow through the compressor. Conservation of mass, momentum and energy and some empirical loss correlations are applied to estimate the real outputs. LÄS MER

  7. 5. Establishment of an open 3D steam turbine flutter test case

    Master-uppsats, KTH/Energiteknik

    Författare :Di Qi; [2016]
    Nyckelord :;

    Sammanfattning : An open three-dimensional (3D) flutter test case for steam turbines is presented. Unlike previous research on turbine flutter, the geometry is an open resource and is from a test case originally presented by Durham University. LÄS MER