Sökning: "CRACK"

Visar resultat 11 - 15 av 394 uppsatser innehållade ordet CRACK.

  1. 11. Fracture simulation with a hyperelastic phase field model

    Master-uppsats, KTH/Hållfasthetslära

    Författare :Adrien Fradet; [2023]
    Nyckelord :Fracture; Phase field modeling; Hyperelasticity; Brott; fasfält-methoden; hyperelasticite;

    Sammanfattning : The phase field method is a versatile tool to study crack initiation and propagation in systems with complex geometries. Based on a variational formulation of the equilibrium equations, the sharp crack topology is regularized by a crack with diffusive edges and the damage is described by a continuous phase field variable. LÄS MER

  3. 12. Impact of Residual Stress on the Warm Pre-Stressing Effect

    Master-uppsats, KTH/Hållfasthetslära

    Författare :Emil Danielsson; [2023]
    Nyckelord :Warm Pre-Stressing effect; Residual stress; Cleavage fracture; Ferritic Steel; Fracture mechanics; Varm förspänning; Restspänningar; Klyvbrott; Brottmekanik; Ferritiskt stål;

    Sammanfattning : Irradiation of a reactor pressure vessel (RPV) causes a shift of the ductile to brittle transition region towards higher temperature regions. In the event of a pressurized thermal shock (PTS), where the temperature drops drastically, the ductile to brittle transition region might be entered for irradiated ferritic steel. LÄS MER

  4. 13. Evaluation of Crack Depth Meter - An investigation of the crack depth meters possibilities and limitations for commonly occurring damage mechanisms

    Master-uppsats, KTH/Hållfasthetslära

    Författare :Alfred Norberg; [2023]
    Nyckelord :Crack depth measurement; RMG 4015; ACPD; Damage Mechanism; Evaluation; FEM Simulation; Sprickdjupsmätning; RMG 4015; ACPD; Skademekanism; Utvärdering; FEM-simulering;

    Sammanfattning : In this master thesis, the accuracy of the crack depth meter RMG 4015 was evaluated for different types of cracks with various damage mechanisms. In total, 61 crack depth measurements were conducted with the crack depth meter on 56 cracks which were located in the 23 different test pieces supplied by Kiwa. LÄS MER

  5. 14. Standardization in additivemanufacturing : Recommended parameters and fixture solutions for hybrid printing

    Kandidat-uppsats, Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)

    Författare :Patrik Andersson; [2023]
    Nyckelord :Additiv tillverkning; Standardisering; PBF-LB;

    Sammanfattning : This study analyses and examines the hybrid printing process at Uddeholms AB in Hagfors.The objective of this study is to present recommended parameters to achieve optimal printingresults in a newly developed steel as well as a steel powder material designed for additivemanufacturing. LÄS MER

  7. 15. Life extension of welded steel details in bridges

    Master-uppsats, KTH/Lättkonstruktioner, marina system, flyg- och rymdteknik, rörelsemekanik

    Författare :Zhelei Jin; [2023]
    Nyckelord :Welded joints; Fatigue; Pre-fatigue; Life extension; Fracture mechanics; Finite element analysis; HFMI; ; Svetsade fogar; utmattning; förutmattning; livsförlängning; frakturmekanik; finit elementanalys; HFMI; ;

    Sammanfattning : High-Frequency Mechanical Impacts (HFMI) is a surface treatment technique utilized to introduce residual stresses and extend the service life of structures. This project primarily focuses on studying the life extension effects of HFMI on welded structures that have undergone fatigue and have existing cracks. LÄS MER