Sökning: "FE modelling"
Visar resultat 1 - 5 av 123 uppsatser innehållade orden FE modelling.
1. FE-Modelling of Composite Girder tests
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurserSammanfattning : Many of the existing steel-concrete bridges may need to be strengthened, as heavier vehicles areallowed on the Swedish roads. These bridges could possibly be strengthened by post-installingshear connectors. The shear connectors may enhance the load-bearing capacity through a higherdegree of composite action between the steel and concrete interface. LÄS MER
2. Markmodelleringens påverkan på kraftfördelningen i en plattgrundlagd tvåspannsbro
Kandidat-uppsats, KTH/Byggteknik och designSammanfattning : Analys av krafter, spänningar och deformationer baserade på beräkningsmodeller skapade med hjälp av datorprogram med så kallad FE-analys är sedan länge etablerat i branschen. Moderna beräkningsverktyg ska hjälpa ingenjörer att enklare analysera och dimensionera både säkra och hållbara byggnadsverk. LÄS MER
3. Dynamisk analys av betonghåldäck : Parametrisk FEM studie
Kandidat-uppsats, KTH/Byggteknik och designSammanfattning : Hollow-core concrete slabs can be used in buildings to achieve longer floor spans in comparison to regular concrete slabs. However, longer floor spans in combination with low dead-weight make them more susceptible to vibrations.Frequencies between 0-15 Hz are relevant to study since these lower frequencies affect the comfort of humans. LÄS MER
4. Comparison of finite element modelling techniques applied on Gripen structure
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikSammanfattning : The goal of the thesis was to investigate and compare internal loads and bolt loads from different modelling methods using finite element method, from global to detailed, applied to a topologically correct air brake of a JAS 39 Gripen. The finite element method is a common used method for analysing strength properties of different structures. LÄS MER
5. FE-modelling of glulam connection in a pre-tensioned glulam truss : Detailed Finite element modelling of the connection between primary beam and compression stud in a sub-tensioned glulam roof truss
Master-uppsats, KTH/Bro- och stålbyggnadSammanfattning : After the collapse of the roof structure in Tarfalahallen 2020, great attention has been focused on instability of sub-tensioned glulam roof trusses. Investigations were launched to find the reason for the collapse and the cause was instability in the roof truss that supported the roof. LÄS MER