Sökning: "Nominal stress"
Visar resultat 11 - 15 av 21 uppsatser innehållade orden Nominal stress.
11. A digital image correlation method for detection of fatigue cracks in non-load carrying T-joints
Master-uppsats, KTH/LättkonstruktionerSammanfattning : In dynamical loaded welded structures fatigue life is often a limiting factor. Common practise is to reduce nominal stress by increased material thickness which leads to oversized, heavy structures. Those practises are replaced by improvement of production and designingtechniques to utilize better properties of high strength steels. LÄS MER
12. Fatigue Life Analysis of Weld Ends : Using FE-Calculations and Mechanical Testing
Uppsats för yrkesexamina på avancerad nivå, Blekinge Tekniska Högskola/Institutionen för maskinteknikSammanfattning : Fatigue life estimation of welds is a complex issue since the characteristics of each weld are unique depending on load case, geometry and properties. Fatigue life estimation on weld ends is limited and often the weakest point of a weld. LÄS MER
13. Improved lifetime of a rubber spring in an articulated hauler through product development
Magister-uppsats, Linnéuniversitetet/Institutionen för maskinteknik (MT)Sammanfattning : Dampening systems are important in heavy vehicles utilized in rough terrains, with purpose to reduce shocks and vibrations with negative influences on the vehicle and, more importantly, on the operator of the vehicle. During the years the heavy vehicles require sturdier construction parts, due to demands on higher load capacity, where the easy solution to scale up the construction parts is not always applicable for dampening systems with nonlinear behavior. LÄS MER
14. A fatigue investigation in a Kaplan hydropower station operated in frequency regulating mode
Master-uppsats, KTH/EnergiteknikSammanfattning : Due to the increase of intermittent power in the Nordic grid the need for frequency regulation increases. Hydropower has the ability to respond fast to frequency changes in the grid and is the power source mainly used to regulate the frequency in the Nordic grid. LÄS MER
15. Second-order FE Analysis of Axial Loaded Concrete Members According to Eurocode 2
Master-uppsats, KTH/BetongbyggnadSammanfattning : A nonlinear finite element analysis was performed for an axial loaded reinforced concrete column subjected to biaxial bending taking into account second-order effects. According to Eurocode there are two ways to take second-order effects into consideration: nonlinear FE analysis and hand calculation based on the simplified methods explained in Eurocode 2. LÄS MER