Sökning: "design for manufacture and assembly"

Visar resultat 11 - 15 av 38 uppsatser innehållade orden design for manufacture and assembly.

  1. 11. Design of Speed Mud Edition Muffler : RJ Weld & Custom (RJWC)

    Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för ekonomi, teknik, konst och samhälle

    Författare :Tobias Pettersson; Ali Zaid Ali Ali; [2021]
    Nyckelord :Industrial Design; aftermarket muffler; ATV;

    Sammanfattning : The report was a result of the master thesis work for Industrial Design Engineering at Luleå University ofTechnology during spring 2021. The whole project was directed towards RJ Weld & Custom (RJWC) locatedin Boden on one of their best-selling aftermarket mufflers for the ATV, the Mud Edition. LÄS MER

  3. 12. Design and system integration of a rim jet solution utilizing DFMA

    Master-uppsats, KTH/Integrerad produktutveckling

    Författare :Gustav Adolf Adler; [2020]
    Nyckelord :;

    Sammanfattning : Moving a new innovative idea from the drawing board to production is no easy feat. The Swedish sea rescue society (SSRS) has for the past years fostered a new design solution for their jet skis, a alternative water jet that removes the centre hub and utilises rim drive technology. LÄS MER

  4. 13. A study on topology optimization and cost estimation of fused depostion modelling parts

    Magister-uppsats, Högskolan i Halmstad/Rydberglaboratoriet för tillämpad naturvetenskap (RLAS)

    Författare :prince charuvila thekkethil simon; jibin joseph john; [2020]
    Nyckelord :;

    Sammanfattning : Additive manufacturing (AM) is acquiring a lot of importance in the manufacturing field. It makes the whole manufacturing process easier and effectively brings down the manufacturing cost compared to the traditional methods. It also provides the manufacturer with the freedom of customization according to each customer. LÄS MER

  5. 14. New encapsulation concept for robot controller cabinet

    Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)

    Författare :Siyu Guo; [2020]
    Nyckelord :ABB Robotics; Electrical knockout; Explicit dynamics; FEM; Robot controller cabinet; ABB Robotik; Elektrisk knockout; Explicit dynamik; FEM; Robot styrskåp;

    Sammanfattning : Robot controller cabinets are specified with interfaces which make it possible to connect different modules for completing numerous tasks that are chosen for the robot manipulators. Different interfaces will be utilized depend on the kind of tasks and settings that are chosen. LÄS MER

  7. 15. Test bench for Nanosatellite Attitude Determination and Control System (ADCS)devices : Design and manufacture of a Merritt Cage

    Master-uppsats, KTH/Skolan för elektroteknik och datavetenskap (EECS)

    Författare :Alvaro Cano Torres; [2019]
    Nyckelord :Helmholtz; Merri􀆩; Cage; Test; ADCS; Nanosatellite; Magne􀆟c; Orbit; Propaga􀆟on; Weightlessness; Air; Bearing.;

    Sammanfattning : Attitude Determination and Control System (ADCS) is often a complex system on-board any  satellite  which  needs  validation  and  testing  to  prove  its  operability  and  verify  its software  compatibility  with  hardware  and  other  subsystems.    One  failure  in  orbit  is extremely expensive in terms of cost and time due to payload preparation and launch. LÄS MER