Sökning: "suction"
Visar resultat 1 - 5 av 113 uppsatser innehållade ordet suction.
1. A PILOT STUDY ON STAIN REDUCTION Effects of Stains, Cleaning Agents, and Cleaning Methods on Polyester Textiles
Master-uppsats, Göteborgs universitet/Institutionen för kulturvårdSammanfattning : The thesis was an experimental pilot study that investigated efficiency and effects of stains and cleaning agents on polyester textiles. A literature review and interviews with textile conservators were used to understand the degradation of polyester fibres and to find suit-able staining and cleaning agents to use in the experiments of the study. LÄS MER
2. On intermittency in the turbulent asymptotic suction boundary layer
Master-uppsats, KTH/Skolan för teknikvetenskap (SCI)Sammanfattning : This thesis presents a series of direct numerical simulations (DNS) performed in order to understand the discrepancy in the literature regarding turbulent asymptotic suction boundary layers (TASBLs) at low Reynolds numbers. The hypothesis to be tested is that the main reason for higher turbulence intensities observed in experiments compared to DNS is that the latter exhibits intermittent patches of laminar flow, developing both temporally and spatially. LÄS MER
3. Effect of Refining on Softwood Pulp with Addition of Eucalyptus for Greaseproof Paper Production : Vacuum Dewatering in Laboratory Scale
Master-uppsats, Karlstads universitet/Institutionen för ingenjörs- och kemivetenskaper (from 2013)Sammanfattning : We are provided countless products from the forest industry and has been through many years. Paper, paper board, packaging materials and furniture to mention a few. A special type of paper used in food packaging for example, is greaseproof paper. LÄS MER
4. Robot arm with object detection for waste management
Kandidat-uppsats, KTH/Skolan för industriell teknik och management (ITM)Sammanfattning : Recycling is becoming more crucial due to the fast pace of consumerism. This thesis explores how well a robot arm, with three degrees of freedom, can be implemented to give an autonomous recycling process. After the prototyping phase it was found that a cylindrical robot arm was best suited for the project. LÄS MER
5. Dimensioning study of EPR2 fuel pool cooling system
Master-uppsats, KTH/FysikSammanfattning : The PTR system allows the EPR2 fuel pool to be cooled. The evacuation of the residual power fromthe pool is ensured by several heat exchangers and pumps, which have to be dimensioned in order to meetdifferent requirements.In order to dimension them, the worst-case scenario of the components must first be determined. LÄS MER