Sökning: "Experimental Dynamics Testing"
Visar resultat 16 - 20 av 38 uppsatser innehållade orden Experimental Dynamics Testing.
16. Modeling of a Gear Test Rig : An Investigation of Static Loads and Dynamic Excitation of Vibrations
Master-uppsats, Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)Sammanfattning : Today the automotive industry is going through big changes and facing many new challenges due to the transformation to a sustainable transport solution in combination with tougher legal demands. Gears have been around for a long time and it is one of the most efficient ways of transferring rotary motion from one shaft to another. LÄS MER
17. Development of a System Identification Tool for Subscale Flight Testing
Master-uppsats, Linköpings universitet/Fluida och mekatroniska systemSammanfattning : Aircraft system identification has been widely used to this day in applications like control law design, building simulators or extending flight envelopes. It can also be utilized for determining flight-mechanical characteristics in the preliminary design phase of a flight vehicle. LÄS MER
18. Physical modeling of a heavy-duty engine for test-cycle simulations in Modelica
Uppsats för yrkesexamina på avancerad nivå, Lunds universitet/Institutionen för reglerteknikSammanfattning : Engine development for reduced fuel consumption and for the ability to use alternative types of fuels is required as emissions and the limited access of petroleum are issues coupled to diesel engines. Experimental testing is in many cases insufficient and expensive in comparison with simulations for engine development. LÄS MER
19. Real-time Thermal Flow Predictions for Data Centers : Using the Lattice Boltzmann Method on Graphics Processing Units for Predicting Thermal Flow in Data Centers
Uppsats för yrkesexamina på avancerad nivå, Luleå tekniska universitet/Institutionen för system- och rymdteknikSammanfattning : The purpose of this master thesis is to investigate the usage of the Lattice Boltzmann Method (LBM) of Computational Fluid Dynamics (CFD) for real-time prediction of indoor air flows inside a data center module. Thermal prediction is useful in data centers for evaluating the placement of heat-generating equipment and air conditioning. LÄS MER
20. Parameter study of bodywork attachments influencing the chassis dynamics by vibration response analysis
Master-uppsats, KTH/Maskinkonstruktion (Inst.)Sammanfattning : Bilindustrin är i ständig utveckling och är väl medvetna om de ökande kraven från kundermed avseende på körkomfort och körupplevelse. Lastbilar med tunga laster är ofta utrustademed en påbyggnad, till exempel en låda för pallar och gods, en sopsamlare eller en stödram förbärning av timmer. LÄS MER