Sökning: "Pressure Estimation"
Visar resultat 1 - 5 av 136 uppsatser innehållade orden Pressure Estimation.
1. Virtual Sensing for Cluster Vacuum Control
Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)Sammanfattning : The purpose of this project was to develop a virtual sensing model in order to estimate the vacuum level in the milking cluster with data collected further along the milk tube. Measuring the cluster vacuum level is desirable for many applications, such as control and monitoring, but due to the cow's tendency to kick, chew and stomp on anything within reach, placing a sensor in or close to the cluster is both difficult and impractical. LÄS MER
2. Filtering Pressure Oscillations in a Common Rail Pressure Signal with IIR Notch Filters for Injected Fuel Amount Estimation
Master-uppsats, KTH/Skolan för industriell teknik och management (ITM)Sammanfattning : This project concerns an inline six-cylinder (I6) diesel truck engine equipped with common-rail injection system. It has been done at the Swedish truck manufacturer Scania CV AB. The main focus is digital signal processing of the rail pressure sensor signal from the injection system. LÄS MER
3. Deep Neural Networks as SurrogateModels for Fuel Performance Codes
Kandidat-uppsats, Uppsala universitet/Tillämpad kärnfysikSammanfattning : The core component of a nuclear power plant is the reactor and the fuel rods that supply it with fission fuel. Efficient and safe energy extraction is thus highly dependent on the reactor design and the conditions of the fuel rods. To anticipate high-quality operation and potential risks in advance, one must perform simulations on the fuel rods. LÄS MER
4. Investigation of coarse-grid CFD approach for nuclear engineering application
Master-uppsats, KTH/FysikSammanfattning : In this thesis, an innovative coarse grid CFD approach is developed that aims toexploit the capabilities of sub-channel codes and CFD methods while overcoming theirlimitations. In the approach, a very coarse mesh is implemented in the CFD softwareOpenFOAM and a new wall treatment, based on the traditional concept of the wallfunction, is applied to the wall boundary conditions of the domain to take into accountthe low resolution of the grid which does not allow to effectively capture the effect of thesolid walls on the thermo-hydraulics of the flow. LÄS MER
5. Operating procedures and evaluation of a carbon capture pilot plant
Master-uppsats, Lunds universitet/Kemiteknik (CI)Sammanfattning : The rise in global emissions of carbon dioxide and the need for new technologies to combat climate change has prompted extensive research into carbon capture methods. This master thesis focuses on a novel carbon capture absorption technology, developed at Lund University, that utilizes the amine 2-amino-2-methyl-1-propanol (AMP) in the organic solvent dimethyl sulfoxide (DMSO) to capture CO2. LÄS MER