Sökning: "SSRT"
Visar resultat 1 - 5 av 6 uppsatser innehållade ordet SSRT.
1. Effect of Proton Irradiation on the Mechanical Properties of Fe-10Cr-4Al in Liquid Lead
Master-uppsats, KTH/FysikSammanfattning : Among the structural materials under consideration for future lead-cooled fastreactors, special attention is paid to ferritic Fe-10Cr-4Al due to its superior corrosionand erosion protective properties, as well as its insensitivity to liquid metalembrittlement in liquid lead. This thesis gives an inside look into the radiation damageproperties of the alloy and the possible embrittlement scenarios. LÄS MER
2. SSRT of 10-4 FeCrAl in LBE and Pb to Characterize Liquid Metal Embrittlement Effects
Master-uppsats, KTH/FysikSammanfattning : In this work the susceptibility of Fe-10Cr-4Al steel to liquid metal embitterment (LME)in low oxygen environment was investigated. slow strain rate testing (SSRT) wereconducted on 10-4 FeCrAl steel in a stagnant lead from 340-480◦C, lead-bismutheutectic (LBE) from 140-450◦C and lead-bismuth mixture at 375◦C with increasingbismuth content from 0. LÄS MER
3. Hydrogen-assisted stress corrosion cracking of high strength steel
Master-uppsats, KTH/MaterialvetenskapSammanfattning : In this work, Slow Strain Rate Test (SSRT) testing, Light Optical Microscopy (LOM) and Scanning Electron Microscopy (SEM) were used to study the effect of microstructure, corrosive environments and cathodic polarisation on stress corrosion cracking (SCC) of two grades of high strength steels, Type A and Type B. Type A is manufactured by quench and tempered (Q&T) method. LÄS MER
4. Hydrogen-assisted stress corrosion cracking of high strength steel
Master-uppsats, KTH/Skolan för kemivetenskap (CHE)Sammanfattning : In this work, Slow Strain Rate Test (SSRT) testing, Light Optical Microscopy (LOM) and Scanning Electron Microscopy (SEM) were used to study the effect of micro-structure, corrosive environments and cathodic polarisation on stress corrosion cracking (SCC) of two grades of high strength steels, Type A and Type B. Type A is manufactured by quench and tempered (Q&T) method. LÄS MER
5. Hydrogen-assisted stress corrosion cracking of high strength steel
Master-uppsats,Sammanfattning : In this work, Slow Strain Rate Test (SSRT) testing, Light Optical Microscopy (LOM) and Scanning Electron Microscopy (SEM) were used to study the effect of microstructure, corrosive environments and cathodic polarisation on stress corrosion cracking (SCC) of two grades of high strength steels, Type A and Type B. Type A is manufactured by quench and tempered (Q&T) method. LÄS MER